MASCO Catalog: Concrete & Masonry Tools (For the Trades)

97 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T BN RA0315 JIFFY Produces a smooth, lump free, bubble free mix in just a few seconds when chucked into any ¼", ⅜" or ½" drill. Recommended speed of 450-700rpm. The two vertical blades keep the mixing action inside the cage of the tool. The sealed ring design prevents puncturing or damaging mixing container. No. Shank Shaft Head Wt (lbs) Stainless Steel TMX J15 ¼" 15" 2" 0.50 TMX J21 ⅜" 21" 3¾" 1.50 TMX J30 ¼" 30" 2" 1.25 TMX J40 ½" 40" 5" 2.50 TMX J10 ¼" 10" 1¼" 0.35 JIFFLER Two Wheels - Two steel mixing wheels. Easily mixes five gallons of paint in two minutes. No. Head Size Shank Wt (lbs) TMX J24 5" ⅜" x 24" 2.20 HAND HELD PADDLE MIXER The ultimate mixer for mortars, grouts and viscous materials. Dual speed power mixer with a soft start feature. Variable speed with a constant speed control setting. Ergonomically designed with a soft grip feature. Threaded shaft connectioncreatesoptimalperformancewhenmixing largequantitiesofviscous materials. Maximum batch size up to 25 gallons depending on consistency. No. Description Wt (lbs) BN 6208B 11 Amps, 120v, 2-speed, with mixing paddle. 16.50 BN 6402A 11.7 Amps, 120v, 2-speed, with mixing paddle. 19.00 MIXING PADDLES Professionalmixing tool for viscousmaterials. Threaded shaft promotes apositive connection. Part # 001-120 is designed for plasters, adhesive mortars, mortars, tile adhesives and fillers; best for sticky and viscous materials. Part #003-140 is designed for concrete, mortars, plasters, heat-insulating plasters, and epoxy resin with sand; best for heavy and high viscosity materials. Part #004-140 is designed for thinset, tile adhesive, grout, adhesive mortars, ready-mix mortars, and pointing mortars & fillers, best for small volumes on high speed mixers. Part #008-120 (sold inpairs left & right) is designed for concrete, cement,mortars, and grouts with aggregate less than 3/8" diameter. Also for gypsum lime plaster, fibrated aluminum roof coatings and paints. No. Head Size Shaft Connection Wt (lbs) BN 001-120 4-3/4" 24" M14 x 2 male threads 5.00 BN 003-140 4-3/4" 24" M14 x 2 male threads 5.00 BN 004-140 4-3/4" 24" M14 x 2 male threads 5.00 BN 008-120 4-3/4" 24" 1/2" Hex Shank (sold in pairs) 5.00 Chuck Adapter - Optional BN RA0315 1/2" Chuck adapter available for any hexagonal shaft mixing paddles. 1.00 BN 6208B BN 6402A BN 003-140 BN 001-120 BN 008-120 BN 004-140 MIXERS