MASCO Catalog: Concrete & Masonry Tools (For the Trades)

9 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T No. Grit Size Wt (lbs) TAB SC716 16 7" 0.40 TAB SC724 24 7" 0.40 TAB SC736 36 7" 0.40 TAB SC760 60 7" 0.40 TAB SC780 80 7" 0.40 TAB SC7120 120 7" 0.40 TAB SC416 16 4½" 0.20 TAB SC424 24 4½" 0.20 TAB SC436 36 4½" 0.20 TAB SC460 60 4½" 0.20 TAB SC480 80 4½" 0.20 TAB SC4120 120 4½" 0.20 For use with the above discs. No. Size Wt (lbs) TAB SC4P 4" x ⅝" -11 Rubber Back Up 0.40 TAB SC7P 7" x ⅝" -11 Rubber Back Up 0.70 TAB SCW Spanner Wrench for above 0.20 TAB SCN Pads Nuts 0.10 WRENCH SEMI-FLEX DISCS Semi-Flex grinding discs are recommended for aggressive grinding, T27 Silicon Carbide is made for non-ferrous materials such as cast in place, precast concrete, fiberglass, stone, epoxy and cow hooves. Because of the spiral design and air holes, the disc runs cooler which prevents loading and increases production. Discs can be used flat so the maximum surface area can be covered. WHEELS Wheels used for grindingconcrete,masonryandmetalmaterials. They are designed for use on hand-held, right angle grinders. PAD SURFACE CONDITIONING PADS (HOOK-AND-LOOP) Surface Conditioning Pads are best for finishing, cleaning and light deburring on flat metal surface. Pads are designed to work with 3M surface conditioning products for better result. No. Size Grit Wt (lbs) TAB SB412C 4½" x NH Coarse 0.06 TAB SB7F 7" x NH Fine 0.11 Disc Pad Holders TAB SBP412 4½" x ⅝-11 0.40 TAB SBP7 7" x ⅝"-11 0.60 CONCRETE No. Grit Size Type Wt (lbs) TAB D445C 16 4" x ¼" x ⅝" Open Flat 0.20 TAB WC40 16 4½" x ¼" x ⅞" Open Flat 0.35 TAB WC4 16 4½" x ¼" x ⅝"-11 Nut Flat 0.50 TAB WC7 16 7" x ¼" x ⅝"-11 Nut Flat 1.00 TAB WC7S 16 7" x ¼" x ⅝"-11 Nut Saucer 1.00 TAB WC9 16 9" x ¼" x ⅝"-11 Nut Flat 1.50 TAB WC9S 16 9" x ¼" x ⅝"-11 Nut Saucer 1.50 METAL No. Grit Size Type Wt (lbs) TAB D445R 16 4" x ¼" x ⅝" Open Flat 0.20 TAB M207X 16 4½" x .040 x ⅞" Open Flat 0.10 TAB WM40 16 4½" x ¼" x ⅞" Open Flat 0.35 TAB WM4 16 4½" x ¼" x ⅝" -11 Nut Flat 0.50 TAB WM7 16 7" x ¼" x ⅝" -11 Nut Flat 1.00 TAB WM7S 16 7" x ¼" x ⅝" -11 Nut Saucer 1.00 TAB WM9 16 9" x ¼" x ⅝" -11 Nut Flat 1.50 TAB WM9S 16 9" x ¼" x ⅝" -11Nut Saucer 1.50 SILICON CARBIDE TYPE 27 ABRASIVES