MASCO Catalog: Concrete & Masonry Tools (For the Trades)

46 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T No. Diameter Wt (lbs) TDR RB-6 ⅜" x 8" 0.30 TDR RB-8 ½" x 12" 0.60 TDR RB-10 ⅝" x 12" 0.80 TDR RB-12 ¾" x 12" 1.10 Removable Shank TDR RB-14 ⅞" x 12" 0.90 TDR RB-16 1" x 12" 1.10 TDR RB-20 1¼" x 12" 1.30 REBAR EATER The answer to drilling through rebar in concrete! No more broken or shattered hammer bits; now you can drill through the rebar and not have to relocate the hole to avoid the rebar. Straight Shank. No. Size Usable Length Wt (lbs) TDR 207-3-4 3/16 " x 4½" 2½" 0.01 TDR 207-3-6 3/16 " x 6" 4" 0.01 TDR 207-3-10 3/16 " x 10" 8" 0.20 TDR 207-3-14 3/16 " x 14" 12" 0.20 TDR SR055 7/32 " x 14" 12" 0.20 TDR 207-4-4 ¼" x 4" 2" 0.01 TDR 207-4-6 ¼" x 6" 4" 0.10 TDR 207-4-8 ¼" x 8" 6" 0.20 TDR 207-4-14 ¼" x 14" 12" 0.30 TDR 207-6-6 ⅜" x 6" 4" 0.20 TDR 207-6-10 ⅜" x 10" 8" 0.21 TDR 207-6-14 ⅜" x 14" 12" 0.40 TDR 207-7-12 7/16 " x 12" 10" 0.20 TDR 207-8-6 ½" x 6" 4" 0.30 TDR 207-8-10 ½" x 10" 8" 0.40 TDR 207-8-14 ½" x 14" 12" 0.60 TDR 207-9-12 9/16 " x 12" 10" 0.60 TDR 207-10-8 ⅝" x 8" 6" 0.50 TDR 207-10-14 ⅝" x 14" 12" 0.80 TDR 207-12-8 ¾" x 8" 6" 0.60 TDR 207-12-14 ¾" x 14" 12" 1.00 TDR 207-14-14 ⅞" x 14" 12" 1.60 SDS SDS carbide bits are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type chuck. The bits can be used to drill concrete, block, brick, and soft stone. PADDLE Forged in one piece from special high analysis tool steel. Heat treated length to give overall strength. Shanks will not twist off. No. Size Wt (lbs) TDR WB500 ½" 0.07 TDR WB916 9/16 " 0.07 TDR WB625 ⅝" 0.07 TDR WB750 ¾" 0.07 TDR WB1316 13/16 " 0.07 TDR WB875 ⅞" 0.07 TDR WB1516 15/16 " 0.07 TDR WB1 1" 0.07 TDR WB1125 1¼" 0.10 TDR WB112 1½" 0.10 DRILL BITS