MASCO Catalog: Concrete & Masonry Tools (For the Trades)

101 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T COMBINATION CORE DRILL The most versatile drill rig on today's market. This rig allows you to anchor a base to the substrate or if you're unable to set an anchor the vacuum base allows you to attach the base by means of vacuum system. The drill post may also be adjusted to drill on an angle up to 45º. If the area is too confined for drill post, you may detach drill motor and unit becomes a hand held core drill. This rig is ultra light (35 lbs.) and comes with 3 speed motor able to drill up to 6" diameter hole. HAND HELD ELECTRIC DRILL Lightweight hand held drill has 14 amp/110 volt, 3 speed motor and a safety override slip clutch. Comes with water valve attachment and built in leveling bubbles for precision horizontal and vertical drilling. Recommended up to 3" bits hand held, and 6" bits on drill stand. No. Wt (lbs) DP M4COMBO 35.00 HAND HELD POLISHER Rugged, hand-operated 12 inch platform that grinds, hones, and polishes concrete surfaces. Uses three 5" diamond polishing pads or cup wheels. It operates wet or dry (with use of optional cowl). 'Planetary', gear- driven tool. 12 inch platform turns at a lower rate than the higher rotational speed (> 2000 rpm) of 5 inch platens. This provides the best speed for diamond polishing. Unit is powered by a heavy duty FEIN variable speed polisher. This polisher has a center coolant feed, precision bearings and sturdy construction. No. Size Wt (lbs) DP DS301 Hand Held - 3 Head 44.00 SINGLE HEAD WALK BEHIND POLISHER Rugged, 2 HP walk-behind floor version of the DS301 with a 12" platform that grinds, hones and polishes concrete surfaces. Uses three 5" diamond polishing pads or cup wheels. It is driven by 2 HP Baldor electric motor and controller. The controller may be set for 110C or 220V input power. Ideal for use in tight areas, edging under toe kicks, steps and floor surfaces up to 1,000 square feet. Has enough power to grind with heavy duty cup grinding wheels and enough speed for fast polishing. Slurry kit, center coolant feed and 1" vacuum port included. No. Size Wt (lbs) DP DS302 2HP Single Head 235.00 DUAL HEAD POLISHER An ultra powerful 5 HP twin head walk behind grinder-polisher with six 5" rotating floating heads on the surface backed by 220V single phase power. It has a variable speed adjustment knob and uses the same planetary surface system. Each planetary unit has three 5" rotating heads (total of 6 on the machine), each with a 5/8-11 spindle. For polishing, 5" Velco ® backup plates allow easy attachment of diamond polishing discs. No. Wt (lbs) DP WEKA 15.00 No. Size Wt (lbs) DP DS605 5HP Dual Head 320.00 POWER TOOLS