MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 99 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville EPOXY PATCH Horizontal Concrete Repair Description : A 100% solids, 3-component, moisture insensitive, low modulus epoxy resin repair system. The resin binder is designed to have high elongation and flexible properties which makes it suitable for use in applications where resistance to impact, mechanical and thermal movements are required. Application : Use for a wide range of concrete repair and restoration. Use to repair concrete floors in warehouses, loading docks, parking decks and ramps, bridge decks and other areas where permanent repair resistance to impact, thermal and mechanical movement is required. Applicable Standards : ASTM C-881-90; Type III; Grade 1; Classes A, B for epoxy resin systems. Coverage : 1 unit will yield approximately .40 ft³ or 690 in³. Applied at ¼" thickness, 1 kit will cover approximately 18–20 ft². Specifications : At 75˚ F Compressive Strength: (ASTM C-109 Mod) 4 hrs 1,400 psi 18 hrs 7,000 psi 3 day 9,400 psi 7 days 9,800 psi Mix Ratio: Pre-portioned kit Pot Life: 15 min Cure Time: Initial 3–4 hrs Final 7 days Description : A self-leveling, low viscosity, two-part liquid polyurethane-hybrid polymer. When supplemented with its proprietary blended aggregate, this product is used to repair and rehabilitate concrete and asphaltic concrete pavements. The enhanced polymer is high performance, rapid setting, and can be used to make an impact and traffic resistant polymer concrete that can be used at temperatures down to 0°F (-18°C). Within minutes of placement, durable, long- lasting repairs are able to handle vibration, heavy traffic, and thermal movement. • No priming required to bond to concrete, asphalt, steel or wood • Waterproof, chemically resistant membrane protects substrates from freeze-thaw spalling • Use neat or with aggregate • Stops further corrosion of reinforcing steel • Traffic ready in as little as 30 minutes • Very low odor • Make repairs year round, can be used in temperatures down to 0°F Applications : • Expansion joint and bridge header reconstruction • Control joint filler • Repair cracks, potholes, spalls • Airport runways, walkways, floors, and parking lots • Airport lighting cans and conduit channels Applicable Standards : ASTM C-881-90; Type III; Grade 1; Classes A, B for epoxy resin systems. Coverage : .32 gal. “A”, .32 gal. “B” and 50 lbs. of aggregate yielding approximately .41 ft 3 per kit. Specifications : At 77˚ F Compressive Strength: (ASTM C-579B) 1 hr 2,000 psi 1 day 6,000 psi 7 days 7,000 psi 28 days 8,00 psi Tensile Strength: (ASTM D-412) 3,000 psi Bond Strength: (ASTM C-882) 2,000 psi Elongation: (ASTM D-638) 10-15% Cure Time: 30 min Mix Ratio: 1A:1B Color: Dark Grey Masco Fastpatch Rapid Surface Repair (RSR) EZ-Mix No. Size MS FP 50 lb. unit, 36/pallet No. Size FS RSR Kit: 2 x .32 gal bottles w/50 lb bag of agg.