MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 89 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Horizontal Concrete Repair TROWELABLE STRUCTURAL REPAIR (FAST SET) Versaspeed 100 Description : VERSASPEED 100 is a versatile, single component, rapid strength gaining repair mortar for horizontal, and form and pour repair projects. Requiring only the addition of water, VERSASPEED 100 is a low shrinkage, high early strength material that is easy to use for fast turnaround projects. Repaired areas may be open to standard tire traffic just 2 hours following the final set, and non- breathable coatings can be applied after 4 hours. VERSASPEED 100 is similar in appearance to concrete and is suitable for use in repairing concrete surfaces from approximately 1/4” to 6” in thickness. • Suitable for interior or exterior applications • Open to light duty traffic as soon as 1 hour • Coat with epoxy after 4 hours at 70°F • Micro-fiber reinforced • Shrinkage compensated • Can be placed up to 2 in. neat • Can be extended up to 50% by weight Applications: • Multi-unit residential • Bridges • Loading docks • Highways • Warehouses • Pavements • Roads • Parking decks and ramps Coverage: 0.39 ft³ per bag/pail when mixed with 5.25 pints of water. For application over 2" extend with 25 lbs clean, washed pea gravel. Yield is approximately 0.50 ft³ Specifications: The following are typical values obtained under laboratory conditions. Compressive Strength (ASTM C109): 1 hour 2,600 psi 2 hours 3,600 psi 3 hours 5,000 psi 1 day 6,000 psi 7 days 7,500 psi 28 days 10,500 psi Flexural Strength (ASTM C293): 1 day 830 psi 7 days 1,000 psi 28 days 1,500 psi Bond Strength (ASTM C882): 1 day 1,800 psi 7 days 2,300 psi 28 days 2,700 psi Set Time (ASTM C266): Initial set 10 - 20 minutes, Final set 20-40 minutes No. Size EU VS100 50 lb bag, 64/plt EucoRepair SCC Fast Description : EUCOREPAIR SCC FAST is a fast setting, one component, cementitious, self-consolidating repair mortar that is shrinkage compensated, pozzolan and microfiber modified, and contains an integral corrosion inhibitor. It is designed for horizontal and formed vertical and overhead structural repairs in applications from 1 inch to full depth where a faster return to service is required. This material is non- metallic and non-staining. • Shrinkage compensation and reduction to minimize cracking • Pre-mixed with pea gravel, ready- to-use • Low permeability with excellent freeze-thaw resistance • Pozzolan and microfiber modified • Contains an integral corrosion inhibitor • Rapid-hardening allows user to strip forms same day • Can be coated 5 hours after final set Applications: • Parking decks • Joint repairs • Balconies • Equipment bases • Pavements • Beams • Vertical & overhead formed repairs Coverage: Approximately 0.37 ft³ per bag. Specifications : Typical Engineering Data @ 70°F Compressive Strength ( ASTM C-39): 2 hour 2,500 psi 1 day 4,500 psi 7 days 6,000 psi 28 days 8,000 psi Flexural Strength (ASTM C-78): 1 day 500 psi 7 days 900 psi 28 days 1000 psi Bond Strength (ASTM C882): 1 day 2,200 psi 7 days 3,200 psi 28 days 3,500 psi Set Time (ASTM C-C403): Initial approx. 50 min Application Life: approx. 20 - 30 min Thickness per Lift: 1" minimum to full depth No. Size EU ERSCC-FS 50 lb bag, 64/plt