MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 85 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : A 2-component latex modified patching and underlayment material. One is a high solids content acrylic latex. The other is a portland cement with graded silica and special chemical additives. LAtex modified concrete gives improved bonding, improved chemical resistance, water resistance, tensile strength, compressive strength and flexibility. Application : This high strength portland cement latex combination provides a smooth durable semi- resilient surface which can be used as a finished floor in many applications. Easy to mix and apply, requiring no special tools. Suitable for use as a flowable topping or underlayment, or as a floor or wall repair material when mixed to a stiffer, trowelable consistency. Meets and exceeds the high quality standards required by architects. Coverage: One 45 lb. bag of powder and 1 gal. of liquid will yield 0.42 ft 2 and will cover 45 ft 2 at 1/8" thickness. For applications over 1", extend with 20 lbs. clean washed pea gravel. Yield will be increased to approximately 0.55ft 2 Specifications: Compressive Strength (ASTM C-109): 1 day 2,000 psi 7 days 4,100 psi 28 days 5,500 psi Slant Shear Bond (AASHTO T-237): 28 days 1,400 psi Set Time (ASTM C-266): Initial 120 min Final 240 min Application Life: 25 min Thickness Per Lift: ⅛" – 1" neat 1" – 3" extended No. Size Powder PCR PC 45 lb. bag, 80/pallet Liquid PCR 1GPCL 1 gal. pail, 4/case, 40 lbs. PCR 5GPCL 5 gal. pail, 50 lbs., 24/pallet Patchcrete CP Description : CP is a trowel-grade, cementitious topping for filling and repairing areas of indoor and outdoor concrete above, on or below grade. Engineered with Portland cement and select high-performance polymers, CP readily bonds to concrete surfaces. It is easy to apply, hardens quickly, is freeze-thaw resistant, and produces a surface finish that is suitable for foot and rubber tire traffic. When mixed with water, the result is a creamy, smooth consistency that can be applied by trowel or screed. Applications: • Portland cement-based concrete patch and fill • Repair, re-slope and re-form all concrete surfaces • Suitable for foot and rubber tire traffic • Suitable for commercial and resident applications • Use for interior and exterior floors and walls • CP to fill spalls, gouges, dormant cracks, “birdbaths” and other low areas in existing concrete surfaces, including sidewalks, patios, plazas, courtyards, walkways, driveways, parking garages, pool decks and vertical concrete surfaces. CP can also be used to re-form concrete steps and curbs, to create ramps over existing concrete, or to resurface vertical concrete substrates Coverage (approx.): 22.5 sq. ft. per bag at 1/4" thickness. Specifications: The following results were developed under laboratory conditions @ 70 °F. Compressive Strength (ASTM C109/ mod – Air cure only): 28 days 3600 psi Thickness: Installed from 1/4” to 1/2” neat, and up to 2” with the addition of proper aggregate (1 part aggregate per volume). Pot Life: 30 minutes Walkable: Light foot traffic in 2 hours No. Size ARD CP40 40 lb bag, 64/pallet TROWELABLE OVERLAYMENT Horizontal Concrete Repair