MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 73 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Dry Pack Super Flow-Rock Description : A natural aggregate, high strength, non-shrinking material designed specifically for mixing and placing at a damp pack consistency. When mixed with a minimum of water, it can be placed into voids and spaces where forming or containment of self-leveling grouts is not possible or desirable. Application : Designed to be used on application such as structural baseplates, equipment and machinery, anchor bolts, precast elements, honeycombing. Features/Benefits: • Extremely cohesive at damp pack consistency • Non-staining and similar to concrete in appearance • Contains no chloride based or corrosive ingredients • High compressive strength for maximum bearing capability • Non-shrink for long term support Application Standards: CRD C-621, ASTM C-1107-89 (modified) Coverage : One 50 lb. bag will yield .40 ft 3 of material. For grouting depths 2" - 4" extend by 15 lbs. clean pea gravel. Yield will be increased to approximately .50 ft 3 . Specifications : At 72˚ F Compressive Strength (ASTM C-109, modified): 1 day 3,000 psi 3 days 5,000 psi 7 days 6,500 psi 28 days 8,000 psi Application Life: 25 min. Thickness Per Lift: ¾ " - 2" neat 2" - 4" extended Description : A rapid setting, nonmetallic, portland cement based hydraulic cement. Includes select grades of silica sand and additives to provide more strength, shrinkage compensation, improved flow and rapid setting. Anchors by controlled expansion locking the material to be anchored in place. Contains no ferrous metals and is non-rusting. Application : Designed to be used as an exterior or interior anchoring cement. Can be used to anchor bolts, stairway railings, pipe railings, reinforcing rods, signs, posts and virtually any anchoring job. May also be used to grout columns, bearing plates, machinery and precast members. Suitable for use where there is exposure to water and freeze- thaw conditions. Coverage : 45 lbs. yields approximately .40 ft³ of mixed material. Not extendable. Specifications : At 72° F Compressive Strength (ASTM C-109, Air cured): Flowable: 1 day 5,465 psi 3 days 6,950 psi 7 days 7,900 psi 28 days 9,650 psi Flexural Strength (ASTM C-348 Air cured): 7 days 1,460 psi 28 days 1,780 psi Pullout Strength (1" diameter bolt, 2" diameter hole, 8" deep): 7 days over 40,000 lbs. Set Time (ASTM C-266): Initial 17 min Final 35 min Application Life: 10 min Thickness Per Lift: ½"–2" No. Size EU DP 50 lb. bag, 64/pallet No. Size PCR SFR 45 lb. pail, 36/pallet SPECIALTY Grouts