MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 72 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville EUCO Hi-Flow Grout Description : Specially designed for use where high tolerance, high strength and high fluidity are required. Formulated as a natural aggregate system with a shrinkage- compensating binder and is highly flowable without sacrificing strength or performance capabilities. Formulated to provide consistent and exacting performance in critical grouting operations. Application : Recommended where shrinkage must be eliminated to achieve full bearing, load transfer such as: • Machinery and equipment requiring high strength, maximum bearing, impact resistant, nonshrink grouting. • Structural columns. • Crane rails. • Bridge seats. • Bearing plates. • Anchorages. Thickness Per Lift: ½ " - 2" neat 2" - 6" extended Applicable Standards : Meets requirements of CRD-C-621, ASTM C-1090, ASTM C-1107, grades A, B, & C. Coverage : One 50 lb. bag yields approximately .45 ft³ of fluid grout when mixed with 1.2 gal of water. For applications over 2" extend with 20 lbs. of clean washed 3/8" pea gravel. Yield will be increased to approximately .58 ft 3 . Specifications : At 72° F Compressive Strength (ASTM C-109): 1 day 4,000 psi 3 days 6,000 psi 7 days 7,000 psi 28 days 9,000 psi Set Time (ASTM C-191): Initial 3 hrs, 50 min Final 4 hrs, 50 min Application Life: 30 - 60 min No. Size EU HF 50 lb. bag, 64/pallet PRECISION FLUID Grouts SikaGrout 328 Description : SikaGrout-328 is a non- shrink, non-metallic, cementitious precision grout powered by ViscoCrete technology. This grout provides extended working time and exceptional physical performance at fluid consistency. A structural, precision grout, SikaGrout- 328 can be placed from fluid to dry pack. ▪ Multiple fluidity with one material ▪ Reaches 10,000 psi in dry pack consistency ▪ Outstanding performance in fluid state ▪ Extended working time ▪ Excellent fluidity - sufficient time for placement ▪ Contains premium quality quartz aggregate ▪ Hardens free of segregation ▪ Non-metallic, will not stain or rust ▪ Shows positive expansion Applications: • Where exceptional one day and ultimate compressive strengths are required. • Applications requiring a pumpable grout. • Non-shrink grouting of machinery and equipment, base plates sole plates, precast panels, beams, columns and curtain walls. • Applications where a non-shrink grout is needed for maximum effective bearing area to transfer optimum load. • For underwater application in conjunction with Sikament® 100 SC. Consult Technical Service for dosage information. Independent test data is available however on site testing is recommended to confirm performance under actual field conditions. • For grouting rebar, bolts, dowels and pins, etc. Application Standards: • Meets ASTM-C 1107 (Grade B & C) • SikaGrout®-328 is USDA certifiable Coverage: 0.44 ft 3 per bag at fluid consistency. Specifications : At 73 ° F Compressive Strength (ASTM C-942): Flowable: 1 day 4,000 psi 3 days 6,000 psi 28 days 8,000 psi Fluid: 1 day 3,500 psi 3 days 5,500 psi 28 days 7,500 psi Flexural Strength (ASTM C-293): Fluid: 3 days 1,100 psi 7 days 1,200 psi 28 days 1,300 psi Set Time: Flowable: Initial: > 3 hrs Final: < 7 hrs Fluid: Initial: > 4 hrs Final: < 8 hrs Thickness per Lift: 1/2" minimum, 6" maximum. No. Size SK 328 50 lb bag, 56 bags/plt