MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 70 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville SikaGrout 212 Description : SikaGrout-212 is a one-component, ready to mix, free flowing, non-shrink, cementitious grout with a unique 2- stage shrinkage compensating mechanism. ▪ Easy to use (ready to mix powder) ▪ Shrinkage compensated properties in both the plastic and hardened states ▪ Multiple fluidity with a single component ▪ Good bond to concrete ▪ Non-metallic, will not stain or rust ▪ Contains no chloride ▪ Blend of shrinkage-reducing and plasticizing/water- reducing agents ▪ Low heat build-up ▪ Excellent for pumping: does not segregate, even at high flow. No build-up on equipment hopper ▪ Superior freeze/thaw resistance Applications: ▪ General purpose grouting ▪ Machine and column base plates ▪ Anchor rods, bearing plates ▪ Ram in place as a dry pack ▪ Trowel-apply as a medium flow ▪ Pour or pump as high flow ▪ Bedding joints in pre-cast concrete sections ▪ Filling cavities, voids, gaps and recesses ▪ On grade, above and below grade ▪ Indoors and out Application Standards: ▪ Meets ASTM C-1107 (Grade C) ▪ Shows positive expansion when tested in accordance with ASTM C-827 ▪ SikaGrout-212 is USDA certifiable Coverage: 0.44 ft 3 at fluid consistency. For applications 4” or greater, extend with 25lbs of clean, washed pea gravel. Yield will be increased to approximately 0.60 ft³. Specifications : At 73 ° F Compressive Strength (ASTM C-942): Plastic: 1 day 4,500 psi 7 days 6,100 psi 28 days 7,500 psi Flowable: 1 day 3,500 psi 7 days 5,700 psi 28 days 6,200 psi Flexural Strength (ASTM C-293): Plastic: 28 days 1,400 psi Flowable: 28 days 1,200 psi Set Time: Plastic: Initial: 3.5–4.5 hrs Final: 4.5–5.5 hrs Flowable: Initial: 4-5 hrs Final: 5.5-6.5 hrs Thickness per Lift: ½”-4” neat, 4”+ extended with pea gravel No. Size SK 212 50 lb bag, 56 bags/plt Five Star Regular Description : A nonshrink grout for supporting machinery requiring precision alignment. When tested in accordance with ASTM C-827, Five Star Grout shows positive expansion. Application : Recommended for grouting machinery baseplates to maintain precision alignment. Nonshrink grouting of structural steel and precast concrete. Installation of anchors and dowels. Support of tanks and vessels. Repair of concrete in confirmed areas. Applicable Standards : When tested in accordance with ASTM C-827, Five Star Grout shows positive expansion. Meets the performance requirements of ASTM C-1107 and CRD-C 621 specifications for nonshrink grout for Grades A, B and C over a wide temperature range and a long working time. Coverage : One bag yields approximately ½ ft³. For applications over 3", extend with 25 lbs. of clean washed pea gravel. Yield will be increased to approximately ⅔ ft³. Specifications : At 72 ° F Compressive Strength (ASTM C-109): Dry pack: 3 day 5,500 psi 7 day 6,500 psi 28 day 8,000 psi Flowable: 1 day 2,500 psi 3 day 3,500 psi 7 day 5,000 psi 28 day 6,500 psi Set Time (ASTM C-266): Initial 4 hrs Final 6 hrs Application Life: 15 min Thickness Per Lift: 1"–3" neat 3"–6" extended No. Size FS G 50 lb. bag, 56/pallet GENERAL PURPOSE Grouts