MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 7 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : A fluidifer for grouts and concrete that promotes flowability, reduces water requirements, reduces bleeding and segregation, increases strength and eliminates setting shrinkage. Application : The excellent fluidity and flowability make it ideal for pumping grout into block walls, under slabs and foundations, filling cracks and crevices in dams and piers, shoring up deteriorated beams and columns, and pumping augured cast-in-place piles. Applicable Standards : ASTM C-937 & CRD C-619. Dosage : 1 lb. approximately is recommended for each 100 lbs. of cementitous material to provide proper expansion and fluidifying characteristics. Should be added in powdered form to the grout mix at the job site. Description : A dry powdered pump primer and pumping aid packaged in a patented, ready-to-use, water soluble bag. Slick-Pak is uniquely formulated for the concrete pumper. Application : Is a lubricant agent for pipe and hose. In addition, Slick-Pak is compatible with all conventional concrete materials and can be used as any standard concrete pumping aid. Dosage : Use the following directions to prime one hundred feet of five inch pump line: Add an 8 oz. Slick-Pak bag to a five-gallon bucket of water. Note: When the concrete contains superplasticizers, we recommend doubling the amount of water used to prepare the Slick-Pak solution for pump priming. Description : A dry powdered concrete pumping aid packaged in a patented, ready-to-use, water soluble bag. Slick-Pak II is uniquely formulated to provide the concrete pumper with a cost effective method for improving the pumpability of hard to pump and/ or harsh concrete and grout mixes. Additionally, it reduces line pressure, improves flow properties and increases the rate and range of pumpability. In addition, Slick-Pak II contains no bentonite, cementitious materials, soaps, or air entraining agents. Application : Improves pumpability of hard to pump mixes. It also decreases hose pressure. As a Concrete Pump Primer: Use one water soluble inner bag in 5 gallons of water to prime 100 ft of 5-inch pump line. Double the water if the concrete contains superplasticizers. Dosage : Approximately 1.5 to 2.5 ounces per cubic yard of concrete or grout. Typically, one 8 oz. bag will treat 4-5 cubic yards. Intrusion Aid “R” Slick-Pak Slick-Pak II No. Size MB INTRUS 2 ⅔ lb. bag, 24/case, 65 lbs. No. Size Slick Pak II FZ 97136 8 oz. bag, 60/case, 32 lbs. No. Size Slick Pak FZ 97134 8 oz. bag, 60/case, 32 lbs. GROUT FLUIDIFIER/PUMPING AIDS Admixtures for Concrete & Mortar