MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 53 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Everclear Luster Seal 300 Description : EverClear is a pure acrylic concrete cure & seal that protects and enhances the appearance of cured concrete with a clear, non- yellowing seal that is harder and more durable than standard cure and seal products. EVERCLEAR is specially formulated to enhance the color of stamped concrete, exposed aggregate, and colored concrete pavers, making these surfaces look deeper and richer in appearance. It provides protection against the damaging effects of traffic, weather, and de-icing salts while allowing the concrete to “breathe”. EVERCLEAR gives concrete a satin finish that highlights the color and texture of surfaces without excessive shine. • Pure acrylic formulation ensures no yellowing and a more breathable seal • Enhances the appearance of colored concrete • Harder and more durable than standard polymer blend cure & seals Applications: • Stamped concrete • Terrazzo • Driveways and sidewalks • Concrete pavers • Decorative concrete overlays • Acid-stained concrete Application Standards: ASTM C1315, Type 1, Class A ASTM C309, Type 1, Classes A & B Coverage: Curing & Sealing Fresh Concrete 1st Coat: 300 to 350 ft²/gal 2nd Coat: (optional) 350 to 400 ft²/gal Sealing or Re-sealing Existing/Cured Concrete 1st Coat: 350 to 400 ft²/gal 2nd Coat: 350 to 400 ft²/gal Specifications : Dry to Touch: < 1 hour Recoat: 4 hours minimum Foot Traffic: 4 to 6 hours Wheel Traffic: 6 to 10 hours Description : A solvent based, clear sealer and hardener for concrete. Non-yellowing, dustproofs, protects, decorates, reduces spalling, VOC compliant, easily cleaned, abrasion resistant. Provides glossy, "wet" look. Application : Exterior and interior horizontal and vertical surfaces such as driveways, stamped concrete, showrooms, decorative concrete, patios, warehouse floors, garages, and exposed aggregate. Limitations : Not recommended for pre-sealed surfaces or nonporous surfaces such as brick, ceramic tile, marble, granite, porcelain and terrazzo. Not intended for water immersion. Consult data sheet for complete information. Applicable Standards : Complies with ASTM C-1315 and ASTM C-309. Coverage : Cure/seal new concrete: 300–400 ft²/gal Seal/dustproof old concrete: 300–400 ft²/gal Exposed aggregate: 200–300 ft²/gal 2 coats recommended for better protection and higher gloss. Specifications : At 75˚ F Tack Free: 1–2 hrs Recoat Time: 2–4 hrs Light Traffic: 4 hrs Vehicle Traffic: 12 hrs Final Cure: 24 hrs No. Size TAM 1GLS300 1 gal. pail, 6/case, 60 lbs. TAM 5GLS300 5 gal. pail, 50 lbs., 36/pallet No. Size EU 5GEC 5 gal pail, 36/pallet ACRYLIC SOLVENT BASED Sealing/Hardening Compounds