MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 52 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Masco Cure & Seal 1315 Masco Cure & Seal 25% UV Description : A clear compound for curing, sealing, hardening and dustproofing concrete. It is used to prevent the rapid evaporation of water from the surface of freshly placed concrete. It is also used as a sealing compound which will effectively seal out construction stains and reduce the cost of cleanup. Mascocure Cure & Seal 1315 is a clear, styrene acrylic copolymer. Sprays easier in cold weather. Application : Can be applied to hardened concrete to seal, harden and dustproof the surface. When used for this application, two coats are recommended. Applicable Standards : Meets ASTM C-1315, Type 1, Class A. Coverage : For proper curing of freshly placed concrete, use Mascocure Cure & Seal at the rate of 300 ft²/gal. For sealing dry, hardened concrete, use at the rate of 300 to 400 ft²/gal/coat. Two coats are recommended for best results. (On exposed aggregate, coverage will be less). Specifications : Dry to Touch: < 1 hour Recoat: 4 hours minimum Foot Traffic: 4 to 6 hours Wheel Traffic: 6 to 10 hours Description : A clear compound for curing, sealing, hardening and dustproofing concrete. It is used to prevent the rapid evaporation of water from the surface of freshly placed concrete. It is also used as a sealing compound which will effectively seal out construction stains and reduce the cost of cleanup. Mascocure Cure & Seal is a clear, styrene acrylic copolymer. Application : Can be applied to hardened concrete to seal, harden and dustproof the surface. When used for this application, two coats are recommended. Applicable Standards : Meets ASTM C-1315, Type 1, Class A. Coverage : For proper curing of freshly placed concrete, use Mascocure Cure & Seal at the rate of 300 ft²/gal. For sealing dry, hardened concrete, use at the rate of 300 to 400 ft²/gal/coat. Two coats are recommended for best results. (On exposed aggregate, coverage will be less). Specifications : Dry to Touch: < 1 hour Recoat: 2 hours minimum Foot Traffic: 2 to 4 hours Wheel Traffic: 6 to 10 hours No. Size MS 1GCS1315 1 gal. pail, 10 lbs., 4/case MS 5GCS1315 5 gal. pail, 50 lbs., 36/pallet MS 55GCS1315 55 gal. drum, 550 lbs. No. Size MS 1GCS25UV 1 gal. pail, 10 lbs., 4/case MS 5GCS25UV 5 gal. pail, 50 lbs., 36/pallet MS 55GCS25UV 55 gal. drum, 550 lbs. ACRYLIC SOLVENT BASED Sealing/Hardening Compounds