MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 50 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Luster Seal WB 150 Luster Seal WB 300 Description : A water based curing and sealing compound. It is resistant to yellowing from sunlight exposure, VOC compliant, non-flammable and ready to use. When used as a curing compound it helps control hydration of the cement by preventing rapid loss of moisture through the surface of newly placed concrete. As a sealer on concrete, exposed aggregate concrete, and other decorative concretes, it is designed to protect and give a semi gloss finish. Application : Used exterior and interior on most horizontal and vertical concrete surfaces. Typically, applications include stamped concrete driveways, patios, garages and commercial buildings. Its low odor makes it ideal for indoor applications in offices, hospitals and schools. It offers outstanding resistance to dirt and attack by air pollutants. Limitations : Not recommended for pre-sealed surfaces or nonporous surfaces such as brick, ceramic tile, marble, granite, porcelain and terrazzo. Not intended for water immersion. Consult data sheet for complete information. Applicable Standards : Meets National AIM VOC Regulations, ASTM C309, Type 1, Class B. Coverage : Cure/seal new concrete: 150–200 ft²/gal Seal/dustproof old concrete: 200–250 ft²/gal 2 coats recommended for better protection and uniform finish. Specifications : At 75˚ F Tack Free: 4 hrs Recoat Time: 12 hrs Light Traffic: 12 hrs Vehicle Traffic: 24 hrs Final Cure: 48 hrs Description : A water based sealing compound. It is resistant to yellowing from sunlight exposure, VOCcompliant, non-flammable and ready to use. Used as a sealer on concrete, exposed aggregate concrete, and other decorative concretes, it is designed to protect and give a semi gloss finish. Application : Used exterior and interior on most horizontal and vertical concrete surfaces. Typically, applications include stamped concrete driveways, patios, garages and commercial buildings. Its low odor makes it ideal for indoor applications in offices, hospitals and schools. It offers outstanding resistance to dirt and attack by air pollutants. Limitations : Not recommended for pre-sealed surfaces or nonporous surfaces such as brick, ceramic tile, marble, granite, porcelain and terrazzo. Not intended for water immersion. Consult data sheet for complete information. Applicable Standards : Meets ASTM C-1315 Type I, AASHTO M148 Type I USDA. Coverage : Cure/seal new concrete: 300–400 ft²/gal Seal/dustproof old concrete: 300–400 ft²/gal 2 coats recommended for better protection and uniform finish. Specifications : At 75˚ F Tack Free: 1 hr Recoat Time: 2–4 hrs Light Traffic: 8–12 hrs Vehicle Traffic: 24 hrs Final Cure: 48 hrs No. Size TAM 5GLS150W 5 gal. pail, 50 lbs., 36/pallet TAM 55GLS150W 55 gal. drum, 550 lbs. No. Size TAM 1GLS300W 1 gal. pail, 6/case, 60 lbs. TAM 5GLS300W 5 gal. pail, 50 lbs., 36/pallet ACRYLIC EMULSION Sealing / Hardening Compounds