MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 42 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville EZ ACCENT Description : EZ-ACCENT is a water- based acrylic stain designed to add colorful accents to any decorative concrete surface. It is a translucent stain that is specially formulated to blend with the base color over which it is applied. EZ-ACCENT water-based stain contains extremely low VOC's which is helpful in earning LEED points for a building project. This product is quickly and easily applied to decorative concrete flatwork, vertical surfaces, and rockscapes for accent colors and natural-looking variations. There are 15 standard EZ-ACCENT colors, but any of the 15 colors can be mixed together for customized, varying results. Application: EZ-ACCENT Water-Based Acrylic Stain comes in a 1 gallon jug that must be shaken thoroughly before use and periodically during use. EZ-ACCENT is a concrete stain that is designed to be translucent, blending with or accenting the base color that is showing through. Do not over-apply EZ-ACCENT stain, multiple coats may trap moisture vapor and lead to discoloration or even delamination. It is not designed to be completely opaque. Do not be afraid to experiment, this product can be applied with a variety of techniques. For large areas, the best results are achieved by spraying through an HVLP Sprayer (High Volume Low Pressure) or a Pump Sprayer. For smaller accent areas, a standard trigger sprayer is ideal. Sprayers whose tips can be adjusted from fine mist to stream will give the best results. EZ-ACCENT can also be applied with a variety of faux finish techniques including rolling, brushing, sponging, and ragging. Water can be sprayed on during the application of the stain to blend different colors and soften hard edges. The best adhesion is achieved by applying EZ-ACCENT to an unsealed concrete surface, but it will also adhere well to other coatings including itself, and non- silicone concrete sealers. This product can be cleaned up easily with water while it is still wet, but removal of dried product must be accomplished with a chemical paint remover. Coverage: A 1 gallon jug of EZ- ACCENT covers between 400-800 square feet. The rate may vary greatly depending on the desired finished effect. Sealing: Surface should be completely dry, usually a minimum of 24 hours after last surface rinsing, and swept clean before being sealed with recommended Masons Sealer. No. Color Reference PL AC800 EZ-ACCENT WHITE PL AC721 EZ-ACCENT ANZA PL AC720 EZ-ACCENT STONE GRAY PL AC719 EZ-ACCENT SLATE PL AC718 EZ-ACCENT SANDALWOOD PL AC717 EZ-ACCENT BUCKSKIN PL AC716 EZ-ACCENT SPANISH BUFF PL AC715 EZ-ACCENT TURQUOISE PL AC714 EZ-ACCENT CIMARRON PL AC713 EZ-ACCENT SEDONA PL AC712 EZ-ACCENT SANDSTONE PL AC711 EZ-ACCENT JUNIPER PL AC710 EZ-ACCENT CHARCOAL PL AC709 EZ-ACCENT COLORADO PL AC708 EZ-ACCENT RUST PL AC707 EZ-ACCENT FAIRWAY PL AC706 EZ-ACCENT PINTO PL AC705 EZ-ACCENT MISSION BROWN PL AC700 EZ-ACCENT BLACK Size 1 gal bottle ARCHITECTURAL CONCRETE Architectural Concrete