MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 38 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville No. Size PCR 1G100 1 gal. pail, 4/case, 40 lbs. P-100 Description : A ready to use, film forming, one time re-emulsifiable liquid bonding agent for concrete. This material, based on a new technology gives outstanding surface and integral bonding without moisture sensitivity. May be used inside or outside. Developed for use as a primer for our Flowcrete self- leveling material and is also used to prime surfaces before applications of Patchcrete. P-100 is an aqueous resin emulsion. It is a film forming co-polymer emulsion. Application : Use as a primer for Flowcrete and Patchcrete. Used as a surface bonder to bond fresh cementitious materials such as concrete, stucco, gypsum, plaster, etc. to various surfaces including concrete, masonry, stone, brick, plaster or wood. May be used inside or outside. Applicable Standards : ASTM C-1059. Coverage : 1 gal. diluted with water will cover 300–350 ft², varies with surface porosity. Plaster-Weld Description : The original plaster bonding agent is a patented formulation incorporating polyvinyl acetate homo-polymer. Designed for interior use only. Color is pink (non-bleeding). Application : High performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams and other structurally sound surfaces. To bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Concrete, brick, block, ceramic tile and metals Applicable Standards : Conforms to ASTM C-631; Military Specification, MIL-B-19235C(YD); General Services Administration Specification for Bond Adhesive; Corps of Engineers Specification CE-240.01. Coverage : Approximately 300 to 400 ft²/ gal. depending upon method of application, temperature, porosity and texture of the substrate. No. Size WC 1GPW 1 gal. pail, 4/case, 40 lbs. Description : A bonding agent for concrete. When used as directed it will improve the bond between new to old, new to new. Simply mix with cement, sand and water. For interior or exterior use. Adheres to properly prepared concrete. Forms strong durable bond and withstands water exposure. Application : Primarily intended for bonding new to old concrete in exterior or interior applications. Used in a wide variety of miscellaneous applications. These include bonding construction joints, prevention of cold joints in multiple pours, leveling of floors prior to secondary surfacing, skid proofing existing floors or finishing concrete block walls. Coverage : 1 gal. of Daraweld-C used in the suggested bonding grout (mixture) will yield approximately .67 ft³. This is sufficient to cover an area of 130 ft² at 1 /16" thickness or 65 ft² at ⅛" thickness. 1 gal. in a topping mix will yield approximately 1.8 ft³. This is sufficient to cover an area of 86 ft² at ¼" thickness. Daraweld-C No. Size H 3GDARA 3½ gal. pail, 35 lbs., 36/pallet H 1GDARA 1 gal. pail, 40 lbs., 4/case RE-EMULSIFIABLE Latex Bonding Agents