MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 30 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : A 100% reactive, two component material designed as a moisture insensitive adhesive and binder with extended working time for numerous application needs. It consists of a white pigmented Part A and a black pigmented Part B. When these parts are combined, the resultant material is medium gray in color. This high modulus system is available in medium viscosity to provide a long pot life for applications which require longer working time than conventional epoxies. Eucopoxy LPL MV epoxy system can be used as an anchoring material for dowel bars and anchor bolts. A repair mortar can be made with this product by adding aggregate. Size, gradation and amount of aggregate will be determined by the application. The user is advised to consider the use of a pre-packaged mortar. Application : Designed for coating, bonding toppings, anchoring and as a general adhesive. Bond fresh concrete to existing concrete. Grout bolts, dowels and rebars into concrete, stone and masonry. Fill joints and voids in masonry. Bonds concrete to dissimilar materials such as steel and wood. Excellent for coating rebar. Applicable Standards : ASTM C 881-02, Types I, II, IV and V, Grade 2, Class C & F. It is suitable for use under ACI specifications 503.1, 503.2, 503.3 and 503.4. Complies with ASTM C 883 and ASTM C 884. Coverage: Applications Eucopoxy LPL MV Bonding Toppings 50 – 100 Ft 2 /gal Coating 110 – 135 Ft 2 /gal Coverage rate of this product is highly dependent upon the concrete surface texture. The workablility desired highly affects the amount of epoxy required. Specifications : At 75˚ F Compressive Strength (ASTM C 695): 1 day 5,000 psi 3 days 8,000 psi 7 days 10,000 psi 28 days 12,000 psi Bond Strength (ASTM C-882): 14 days >2,000 psi Mix Ratio (volume): 2A:1B Pot Life (1 gal.): 55 mins Viscosity: 3,400 cps Thin Film, Open Time: 6 hrs Description : A 3-component, pre-proportioned, water based epoxy modified Portland cement bonding agent and anti-corrosion coating. Used as a bonding agent for placing fresh concrete to existing concrete and for repair and restoration of concrete surfaces. Contains a unique migratory corrosion inhibitor which protects reinforcement when used as an anti-corrosion coating for steel. Has a long open time, is non flammable, VOC compliant, and does not form a water vapor barrier after cure. Application : Used as a bonding agent for fresh concrete to existing concrete, concrete repairs, and as an anti-corrosion coating for steel reinforcement. Can be used for exterior or interior, on grade or above grade applications. Coverage : Coverage rates are approximate, and for estimating purposes only. Surface temperature, porosity, and texture will determine actual material requirements. One full kit of will cover approximately 60 ft². Test the area prior to application to determine effective coverage rates. As a bonding agent : 60–80 ft²/gal As an anti-corrosion coating : 60–80 ft²/gal/coat 2 coats recommended. Specifications : At 75˚ F Compressive Strength (ASTM C-109): 3 days 5,100 psi 7 days 7,300 psi 28 days 10,000 psi Bond Strength (ASTM C-882): 7 days 1 hr open time 2,480 psi 24 hr open time 2,700 psi Mix Ratio: Pre-portioned Kit Pot Life: 30–45 min Initial Set: 2–3 hrs Contact Time: up to 24 hrs (depending on ambient temperature) Eucopoxy LPL MV (Long Pot Life Epoxy Adhesive) Duralprep A.C. No. Size EU 1GLPL 1 gal. unit, 12 lbs. No. Size TAM 1GAC 1 gal. kit, 18 lbs. BONDING AGENTS Adhesive Liquid Epoxies