MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 23 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : A 2 component, 100% solids, moisture insensitive epoxy resin compound also available in a convenient pre-packaged dual component cartridge kit. Features and benefits include rapid setting, high modulus, high strength, virtually no odor and moisture insensitivity. Application : Fast turn-around epoxy injection, anchor bolt grouting, seal cracks, concrete repair, concrete adhesive, and low temperature applications. Applicable Standards : ASTM C-881; Types I, IV; Grade 3; Classes A, B. Coverage : One 8 fl. oz. cartridge will yield approximately 14 in³ of epoxy adhesive. Specifications : At 75˚ F Compressive Strength (ASTM D-695): 7 day 10,000 psi Tensile Strength (ASTM D-638): 7 day 7,000 psi Tensile Elongation (ASTM C-638): 2–4% Bond Strength (ASTM C-882): Hardened to hardened 7 day 3,000 psi Mix Ratio (volume): 1A:1B Pot Life (60 g): 6–8 min Viscosity: Gel Tack Free: @ 20 mils 1½–2 hrs Fast Set Epoxy Gel No. Size TAM FSG 8 fl. oz. cartridge, 24/case (includes nut & nozzle), 24 lbs. Accessories TAM NOZSQ ½" x 7" mixing square nozzle Description : A 100% solids, two component moisture insensitive epoxy structural adhesive system. Has a unique high modulus of elasticity. Gel-like consistency and an easy mix ratio of 1:1 = A:B. Fast setting provides high early strength. Insensitive to moisture before, during and after cure. Provides excellent adhesion to most structural materials. Low temperature cures as low as 40˚ ft. Application : When mixed with salt- free, kiln-dry clean graded aggregate will produce a sag-resistant mortar for both vertical and overhead patching of interior surfaces. Gel like consistency is an excellent structural adhesive for bonding of mating or non-mating surfaces where the glue line will not exceed ⅛". Recommended to grout anchor bolts, to seal cracks, and to set injection ports prior to injection grouting. Applicable Standards : Conforms to ASTM C-881-87, Type I and IV, Grade 3, Class B & C, AASHTO M-235-86. Coverage : 1 gal. yields approximately 231 in³ of epoxy paste. 1 gal. Hi-Mod Gel mixed with 1 gal. by loose volume of oven-dried aggregate yields approximately 370 in³ of epoxy mortar. Smooth surfaces at 12 ft²/gal at ⅛". Specifications : At 75˚ F Compressive Strength (ASTM D-695): 7 day 10,000 psi Tensile Elongation: 3% Flexural Strength (ASTM D-790): 14 day 5,500 psi Bond Strength (ASTM C-882): 14 day 2,400 psi Rough surfaces at 6 ft²/gal at ¼". Mix Ratio (volume): 1A:1B Pot Life: 30 min Viscosity: Gel Tack Free: 4 hrs Masco Hi-Mod Gel No. Size MS 2GHMG 2 gal. unit, 24 lbs. GEL EPOXIES Adhesive Anchoring / Gel Epoxies