MASCO Catalog: Construction Liquid and Powder

22 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : SET-XP is a 1:1 ratio, two-component, high-strength, epoxy-based anchoring adhesive for anchoring and doweling in cracked and uncracked concrete and masonry applications. • Suitable for use in dry or water- saturated concrete • For best results, store between 45°F (7°C) and 90°F (32°C) • Hole-cleaning wire brushes with blow-brush-blow method or Speed Clean DXS drill bits without any further cleaning Application Standards: • Threaded rod anchoring and rebar doweling into concrete and masonry • Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318 • Suitable for horizontal, vertical and overhead applications Description : Formulated for high- strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post- installation identification. • 10:1 two-component high- strength, acrylic-based anchoring adhesive • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry • Suitable for use in dry or water- saturated concrete • Cures in substrate temperatures as low as 14°F (–10°C) in 24 hours or less • Available in 9.4 oz., and 30 oz. cartridges for application versatility • Volatile Orgainic Compound (VOC) – 30 g/L • Manufactured in the USA using global materials Application Standards: • Threaded rod anchoring and rebar doweling into concrete and masonry • Suitable for horizontal, vertical and overhead applications AT-XP SET-XP No. Size SS ATXP10 9.4 fl oz. cartridge, 6/ case, w/mix nozzle SS ATXP30 30 fl oz. dual cartridge, 5/ case, w/mix nozzle Accessories SS AMN19Q Mixing nozzle SS ADT30S Manual cartridge gun for 30 oz. No. Size SS SET22XP 22 fl oz. dual cartridge, 10/case, w/mix nozzle Accessories SS EMNI22 Mixing nozzle with integrated nut SS EDT22B Manual cartridge gun for 22 oz. SS EDTA22CKT 22 fl oz. Battery powered cartridge gun Description : SET-3G is a 1:1 ratio, two-component, high-strength, epoxy-based anchoring adhesive for cracked and uncracked concrete. SET-3G installs and performs in a variety of environmental conditions and temperature extremes. • Jobsite versatility — can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40°F (4°C) and 100°F (38°C) • When properly mixed, SET-3G will be a uniform gray color Applications: • Threaded rod anchor and rebar dowel installations in cracked and uncracked concrete • Installation in downward, horizontal and upwardly inclined (including overhead) orientations SET-3G No. Size SS SET3G 22 fl oz. dual cartridge, 10/case, w/mix nozzle Accessories SS EMNI22 Mixing nozzle with integrated nut SS EDT22B Manual cartridge gun for 22 oz. SS EDTA22CKT 22 fl oz. Battery powered cartridge gun ANCHORING EPOXY CARTRIDGE SYSTEMS Adhesive Anchoring / Gel Epoxies