MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 19 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : FiberForce 350 is a ultra-fine denier fibrillated micro fiber manufactured from 100% virgin homopolymer polypropylene resins. FiberForce 350 is primarily used as shrinkage and temperature reinforcement in concrete. Benefits: • Replaces light-gauge welded wire reinforcement- (6 x 6 W1.4 x W1.4) or reinforcement ratio: ρ ≤0.06% depending on application • Temperature-shrinkage reinforcement • Extends service life of the concrete with reduced maintenance • Increases concrete durability - including impact and abrasion resistance and toughness • Reduces permeability, thus increasing freeze-thaw durability • Excellent distribution throughout the concrete mix Uses: • Slabs-on-ground • Driveways and sidewalks • Topping and overlay slabs (ultra- thin white-topping) • Decks and patios • Shotcrete • Precast • Slipformed curbs and gutters • Irrigation ditches and channels Dosage : The standard addition rate is a 1.0 lb/yd3, FiberForce 350 should be added per project specifications our engineer's instructions. No. Size ABC 350 1 lb. bag, 24 bags/box (24 lb. box), 27 Boxes/ pallet (648 lb. pallet) Fiberforce 350 (Sold only to Redi-mix Concrete Suppliers and Precasters) Description : FiberForce 750 is a blend of macrosynthetic fibers developed for use as a post-first crack reinforcement in concrete. FiberForce 750 marries FiberForce 650 with FiberForce 550 in a proprietary blend to optimize the benefits of both fibers. Both FiberForce 650 and FiberForce 550 are manufactured from a blend of polypropylene and polyethylene resins. The FiberForce 650 component is a tape or ribbon fiber with a mechanically embossed surface to enhance bonding. The Macro-Pro component is a modified fibrillated tape fiber where the main fibrils have been enlarged to increase tensile properties. ASTM C1609 testing has shown that FiberForce 750 meets or exceeds the performance capabilities of competitor’s products while providing excellent distribution and finishing. FiberForce 750 has been accepted by several State DOTs, specifications, and code applications Benefits: • Provides post-first crack residual strength to concrete • Provides temperature-shrinkage reinforcement • Increases concrete durability - including impact and abrasion resistance and fatigue strength • Reduces plastic shrinkage and settlement cracking • Measurably reduces permeability, thus increasing freeze-thaw durability • Provides uniformly distributed reinforcement throughout the concrete, not just in one plane as with traditional steel reinforcement • A cost-effective alternative to traditional steel reinforcement • Delivered to site pre-mixed • Measurably reduces permeability, thus increasing freeze-thaw durability Uses: Interior • Commercial, industrial, and warehouse slabs-on-ground • Composite metal deck Exterior • Slabs-on-ground, Roadway & Highway Pavements • Shotcrete • Bridge Decks Precast • Septic tanks • Burial vaults • Utility vaults Dosage : The recommended dosage rate for FiberForce 750 is typically between, but not limited to, 3 to 11 lbs. per cubic yard. No. Size ABC 750 3 lb. bag, 7 bags/box (21 lbs. box), 27 Boxes/pallet (567 lbs. pallet) Fiberforce 750 (Sold only to Redi-mix Concrete Suppliers and Precasters) FIBERS FOR CONCRETE Fibers for Concrete