MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 18 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : FiberForce 300 is a fibrillated polypropylene fiber manufactured from 100% virgin homopolymer polypropylene resins. FiberForce 300 is primarily used as temperature- shrinkage reinforcement and plastic-shrinkage reinforcement. The fibers measurably reduce plastic settlement, while offering excellent distribution and finishing abilities. FiberForce 300 also extends service life of the concrete by enhancing impact and surface abrasion resistance. The fibrillation pattern optimizes the mechanical bonding between the mortar mix and the fiber networks, thus providing increased plastic and drying shrinkage crack resistance as compared to other microsynthetic fibers. Benefits: • Replacement for typical light gauge welded- wire reinforcement (6 x 6 W1.4 x W1.4) in slab on grade applications • Excellent distribution throughout the concrete mix • Excellent temperature-shrinkage reinforcement • Extends service life of the concrete with reduced maintenance • Increases concrete durability - including impact and abrasion resistance and fatigue strength • Measurably reduces permeability, thus increasing freeze-thaw durability Uses: • Residential and Commercial Slabs- on-Ground • Ultra-thin whitetopping (UTW) • Slipformed curbs and gutters • Irrigation ditches and channels • Shotcrete applications Dosage : FiberForce 300 is typically introduced at 1.5 lbs. per cubic yard. The fibers are packaged in pre- measured degradable bags that can be added directly to the concrete mix. No. Size ABC 300 1.5 lb. bag, 16 bags/box (24 lb. box), 27 Boxes/ pallet (648 lb. pallet) Fiberforce 300 (Sold only to Redi-mix Concrete Suppliers and Precasters) Description : FiberForce 150 is a monofilament polypropylene fiber manufactured from 100% virgin polypropylene resins. FiberForce 150 is primarily used as a plastic- shrinkage reinforcement in concrete. The fiber measurably reduces plastic settlement, while offering excellent distribution and finishability. FiberForce 150 also extends service life of the concrete by reducing permeability and enhancing impact and surface abrasion resistance Benefits: • Uniform distribution throughout the concrete mix • Excellent finishability • Excellent reduction in plastic shrinkage and settlement cracking • Measurably reduces permeability, thus increasing freeze-thaw durability • Increases concrete durability - including impact and abrasion resistance and fatigue strength Uses: • Sidewalks • Decks • Patios • Residential driveways • Pool decks • Extruded curbs and gutter • Basement and garage floors • Stucco Dosage : FiberForce 150 is typically introduced at 1 lb. per cubic yard. Fiberforce 150 (Sold only to Redi-mix Concrete Suppliers and Precasters) No. Size ABC 150 1 lb. bag, 24 bags/box (24 lb. box), 27 Boxes/ pallet (648 lb. pallet) FIBERS FOR CONCRETE Fibers for Concrete