MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 15 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : A water based industrial release that is V.O.C. compliant. It helps prevent asphalt, concrete, dirt and other debris from sticking to treated equipment, forms, hand tools and trucks. Deposits a very thin film causing the surface to become virtually non-stick. Environmentally safe and does not contain any solvents or phosphates. Kleen Kote is water soluble. Non-Staining and Non-Dusting. Meets Army Corp. of Engineer Specs. Application : Can be used as a rust inhibitor. Safe for use on all surfaces. Will not rinse off in the normal rain once a day. Economical Concentrate mixes easily with water. Concentrate form reduces your shipping costs. Using a clean spray container add Kleen Kote & water to achieve the recommended ratio for your application. Adding to water and then adding more water will eliminate need for mixing. May be applied at any time. Application surface should be clean prior to use. Remove all other release agents before applying.Spray on, then let change from white to clear before using. Reapply after every use. Concrete Forms: Wood, aluminum, plastic etc. - make sure to clean or cast off as much of the old release as possible to eliminate any reaction between Kleen Kote and your old form release. Do NOT switch back and forth between Kleen Kote and other release agents. If forms are new, season them just as you would with oil. 11 to 1 for porous surfaces and 15 to 1 for non-porous surfaces. Coverage : 1 gallon of Kleen Kote is required to cover approximately 1,000 to 2,000 ft², depending on surface type. Spray on for best performance and ease of application. No. Size PCS KK1 1 gallon, 10 lbs., 4/case PCS KK 5 gallon, 50 lbs., 24/pallet Description : SSR3 (Synthetic Stone Release) is a ready to use, non-toxic, water-based stable emulsion with excellent release and surface consolidation properties. It is formulated to reduce surface imperfections in precast, prestressed and cast-in-place concrete. It works well on all types of form surfaces as well as rubber, plastic or urethane form liners. Promotes easy removal, provides a water repellent, rain resistant and rust inhibiting film to the formwork. It is suitable for both indoor and outdoor applications particularly where VOC emissions are limited in the workplace. Application : Applied as a release agent and surface consolidating agent on all types of formwork, including but not limited to wood, metals, polyester coated, plastic, rubber or urethane lined surfaces where a high quality release and void free surface are of the utmost importance. When the water is atomized by high-pressure spray application, SSR3 is ideal for automated wet cast production facilities when an airless spray bar is used to apply the release in-line. Suitable for all types of cements, white or gray, colored and non- colored as well. Consult data sheet for complete application instructions. Coverage : 5 gallon pail yields 2,500 – 3,500 sq.ft ./gal. Description : Using the latest micro- emulsion technology, Masco Bio Release is an innovative, 100% natural, organic chemical release agent. Provides quick, easy release and leaves an architectural bondable concrete surface. Application : Ideal for sensitive environmental situations such as bridge framework over rivers and streams or potable water reservoirs. Chemically releases concrete from plywood, steel, aluminum, polystyrene, and fiberglass forms and formliners. Prevents concrete build- up on all equipment. Cleans and reconditions forms. Helps eliminate build-up and bug holes. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8 Form Coating. Navy Dock and Piers 56359. V.O.C. Compliant. 100% Biodegradable. Coverage: Steel, Aluminum, Plastic, High Density Plywood: 1,000–1,500 ft²/gal. Medium Density Plywood, Paper Column Forms: 1,000–1,250 ft²/gal. BB Grade Plywood: 1,000 ft²/gal. Rough Sawn Lumber, Straited Plywood: First use, 2 coats: 500 ft²/gal./coat Subsequent uses: 1,000 ft²/gal. SSR 3 Masco Bio Release Kleen Kote (Concentrate) No. Size MS 5GBR 5 gal. pail, 50 lbs, 24/pallet MS 55GBR 55 gal. drum, 550 lbs. No. Size ACC 5GSSR3 5 gal. pail, 50 lbs., 24/pallet WATER BASED EMULSION Form Releases