MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 14 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Mascokote GP Description : MASCOKOTE GP is a chemical release agent for concrete forms which effectively prevents the bonding of concrete to steel, conditioned aluminum, plywood, composite forms, and formliners. MASCOKOTE GP is manufactured with organic chemicals which reacts with concrete to prevent adhesion and provide a quick, easy release. It contains no diesel, kerosene, wax or silicones. MASCOKOTE GP is a thin amber liquid that remains fluid at subfreezing temperatures. Application : Forms should be free of dirt, hardened concrete, rust, scale, and other foreign matter. Release agent is ready to use direct from container. Apply a thin film using an atomizing or misting spray tip to maximize product performance and economy. Spray uniformly with cross spray to avoid pin holes and uncoated areas. Over application will not produce better results and may cause dusting. Puddles should be wiped up with rags prior to pouring concrete. Prior to coating plywood forms, apply one or two heavy brush coats to edges for waterproofing protection. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8, Navy Dock, and Piers 56359, VOC Compliant. Coverage : Steel & Aluminum: 2000 ft²/gal Plastic & Fiberglass: 2000 ft²/gal HDO plywood: 2000 ft²/gal MDO plywood: 1500 ft²/gal Polyurethane: 1500 ft²/gal BB Grade plywood: 1000 ft²/gal Dimensional Lumber: 1000 ft²/gal Ruff Release (Thixotropic) Description : A unique thickened blue colored release agent primarily for low or no draft applications on rough, irregular or smooth surfaces. Ruff Release yields a smooth and easy release from all types of form surfaces. Application : Apply Ruff Release to the most intricate and difficult form surfaces where release stresses may pose problems or wherever release issues are anticipated. Ruff Release works well in all applications and will not stain the surface on which it is used. May be used on all types of form surfaces including plastic, rubber or styrofoam. Apply a very thin coat with a rag, sponge or swivel type mop. Wipe off excess prior to casting. No. Size MS 5GMKGP 5 gal. pail, 50 lbs., 24/pallet MS 55GMKGP 55 gal. drum, 550 lbs. No. Size ACC 5GRR 5 gal. pail, 50 lbs., 24/pallet PETROLEUM BASED Form Releases