MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 13 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Mascokote Premium Description : A reactive form release with a mineral carrier that leaves an architectural or high visual impact concrete surface. Manufactured with virgin oil and organic chemicals which react with the concrete to prevent adhesion and provide a quick and easy release. Films rapidly on all form surfaces, not slippery, prevents accumulation of dust, and cannot be removed by normal rain showers. Will not break down with steam. Water insoluble, contains no kerosene, diesel, silicone or waxes to reduce effectiveness and damage formwork. It is a thin amber liquid that remains fluid at subfreezing temperatures and can be stored indefinitely. Produces architectural concrete by eliminating bug holes caused by thick form oils. Provides a quick, easy release without staining, discoloration, or pitting. Leaves no residue or cement dust on the concrete surface when properly applied. Concrete is left with an architectural surface and ready for application of curing compounds, sealers, and coatings. When any material is to be applied on top of the concrete, follow the application instructions of the material manufacturer. Application : Specially formulated for use on aluminum and steel forms, but also effective on plywood, composite forms, plastic and urethane formliners. Ideal for architectural precast. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8 Form Coating. Navy Dock and Piers 56359. V.O.C. Compliant. Coverage : Steel, Plastic, Fiberglass: 2000 ft²/gal Conditioned Aluminum: 2000 ft²/gal HDO Plywood: 2000 ft²/gal MDO Plywood: 1500 ft²/gal Dimensional Lumber: 1000 ft²/gal BB Grade Plywood: 1000 ft²/gal No. Size MS 5GMKP 5 gal. pail, 50 lbs., 24/pallet MS 55GMKP 55 gal. drum, 550 lbs. Mascokote VOC Description : A chemical active release agent in a mineral oil carrier for concrete forms which effectively prevents bonding of concrete to the form. For use in steel, plywood, and treated aluminum forms. Manufactured with virgin oil and organic chemicals which react with the concrete to prevent adhesion and provides a quick and easy release. This quick, easy release is provided without staining, discoloration or pitting and leaves no residue or cement dust on the concrete surface if properly applied. Concrete is left with an architectural surface ready for application of curing compound, sealer, bondable for plaster, mastics or paints when used in accordance with manufacturer’s instructions. Application : Forms should be free from dirt, hardened concrete and foreign matter. Release agent is ready to use direct from container. Can be applied with a sprayer, roller or brush at all working temperatures. Apply a thin film for maximum protection and economy. Spray areas uniformly. Over application creates dusting. Prior to coating plywood forms, apply one or two heavy coats to edges for waterproofing protection. When subsequent material is to be applied to the concrete, follow the application and preparation instructions of the material manufacturer. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8, Navy Dock, and Piers 56359, VOC Compliant. Coverage : Steel, Plastic, Fiberglass: 2000 ft²/gal Conditioned Aluminum: 2000 ft²/gal HDO Plywood: 2000 ft²/gal MDO Plywood: 1500 ft²/gal Dimensional Lumber: 1000 ft²/gal BB Grade Plywood: 1000 ft²/gal No. Size MS 5GMK 5 gal. pail, 50 lbs., 24/pallet MS 55GMK 55 gal. drum, 550 lbs. PETROLEUM BASED Form Releases