MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 127 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Perma-Patch Description : A high tech cold patch repair material. Can be applied in any weather conditions. On blacktop or concrete. Just pour it in...it's done! Application : Patching for quick and permanent repairs of potholes, cracks, cable trenches, utility cuts, around manhole covers and sections touching expansion joints. Can be applied to parking lots, bridges, roads and utilities. Coverage : A 60 lb. bag of Perma-Patch fills approximately 0.48 cubic feet. Specifications : Temperature usage range between -15° F to 104° F. No. Size RI PP 60 lb. bag, 50/pallet Mortar Mix Type N Sand Mix Description : A blend of masonry sand, type S lime, and portland cement. Displays superior plasticity and bond properties which allows the joint to be tooled easily and efficiently. This ease of tooling also creates a denser mortar joint that is less susceptible to water intrusion and cracking. Application : Ideal for use on any application where brick, block, or stone is used. Due to it's superior workability, this product is easily used by all masons. Applicable Standards : Meets ASTM C-270 specifications for type N mortar. Coverage : One bag will yield .66 ft³ will lay approximately 30 standard bricks with ⅜" joint. Specifications: Compressive strength after 28 days with proper mixing and water ratio exceeds 750 psi. Description : Sand mix is a dry factory blended mortar specifically designed for use by tile and masonry contractors. Consistent mix ratio and convenience are key advantages. Pre-blending allows the cement to thoroughly coat the sand particles thus producing a stronger finished product. Sand mix is a blended mixture of washed plaster sand and cement. Application : Use it for patching cracks in sidewalks, driveways (for patches 2" or under), building garden pools, setting drain pipes, etc. Coverage : .8 ft³/bag approximately Specifications : Exceeds 3,000 psi with proper mixing and water ratio. No. Size RI SAND 80 lb. bag, 42/pallet No. Size RI MORTN 80 lb. bag, 49/pallet PREMIX Cement / Premix