MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 125 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Structo-Lite Stucco Finish Description: Structo-Lite Gypsum Plaster weighs less than half as much as a sanded base coat. This ready mixed, perlite aggregate plaster provides three times the insulation value of sanded plaster, at an overall cost comparable to job mixed lightweight aggregate plaster. It may be sand float finished or used as a base for acoustical tiles. Smooth trowel finishes may be achieved over Structo-lite Plaster. Requires only adding water on the job. Applicable Standards : Complies with ASTM C-28 for gypsum ready mixed plaster. Coverage : .5 ft³/bag approximately. Specifications : Compressive Strength : 700 psi Dry Weight : 50 psi Description : A textured, portland cement based stucco finish coat. Weatherproofs and decorates concrete and masonry. Mixes easily with potable water. Trowel or spray application. Available in pre-mixed colors. High durability. Consistent uniformly colored finish. Excellent bond. Fiber reinforced available for increase flexural strength and crack resistance. Akkro-7T may be used in the mixing liquid to aid curing, reduce shrinkage, and improve bond qualities and strength. Reduce the amount of water in each batch by 2 quarts and place it with 2 quarts of Akkro-7T. Work started with Akkro-7T in the mix must contain Akkro-7T in subsequent batches to help ensure color uniformity throughout the job. Application : Use exterior or interior on formed or precast concrete, masonry, stone, brick, cement plaster, and stucco brown coats. Applicable Standards : Meets the requirements of ASTM C-926 and ANSI A42.2. Coverage : Coverage rates are approximate and for estimating purposes only. The texture, thickness, and application techniques will determine the quantity required. One 80 lb. bag will cover approximately 60 ft² applied approximately ⅛" thick. No. Size P STRUCTO 50 lb. bag, 40/pallet No. Color TAM SFG Gray TAM SFW White Size : 80 lb. bag, 30/pallet Admix : TAM 1G7T 1 gal. pail, 6/ctn, 56 lbs. TAM 5G7T 5 gal. pail, 50 lbs., 36/pallet Stucco Fiber Base Description : Formulated with Portland Cement. Factory blended and designed for exterior grade construction (interior when applicable). Utilizing proprietary chemically engineered additives to reduce cracking, it increases yield and workability. No chloride accelerators are used in the mix, and all components are compatible with reinforcing steel. Reduces waste, labor, shrinkage, and cracking. Increases productivity. Factory blending offers consistent quality. Easy to transport. Excellent for tight job sites. Just add water. Application : New construction, restoration and repair concrete block or brick, patching. Applicable Standards : Will meet property requirements of ASTM C-926. Coverage : An 80 lb. bag will cover 20 ft² at a thickness of ½". Specifications : Trade Craft Control Compressive Strength : 7 days 2,300 psi 28 days avg. 2,500 psi No. Size RI STUCFIB 80 lb. bag, 49/pallet PLASTER Cement / Premix