MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 121 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Description : is a fast-setting, semi- rigid polyurea used for filling control and construction joints in industrial concrete floors. Product has a super fast set time and an extended shave time. Can be trimmed flush with floor immediately after placement or up to 24 hours later. Supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. Application : Intended for concrete construction and control joints, crack repair for old floors, industrial and commercial floors and freezer floors. Applicable Standards: Complies with ACI 302, and meets USDA requirements for use in food processing facilities. Coverage : 1 ea. 22 fl. oz. cartridge yields approximately 40 in 3 of epoxy adhesive. Specifications : At 70° F Mix Ratio (volume): 1A:1B Tack Free Time: 1-3 min Light Traffic: 15 min Full Traffic: 30 min Shave Time: 30 min to 24 hrs Tensile Strength: (ASTM D-412): 660 psi Shore A Hardness (ASTM D-2240): 84 to 88 Elongation: (ASTM D-412): 220% to 260% Color: Gray Description : QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. QWIKjoint UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. QWIKjoint UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. QWIKjoint UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. • Unparalleled UV resistance • Fast setting formula reduces downtime • Large shave-time window allows for greater flexibility in scheduling joint filling operations • Tough performance reduces floor joint repairs and maintenance • Will cure in temperatures as low as -20° F • No bubbles/foaming when used in damp joints • Less moisture-sensitive than standard polyureas Applications: • Concrete construction & control joints • Crack and joint repair for old floors • Industrial and commercial floors • Freezer floors Application Standards: • EUCO QWIKjoint UVR complies with ACI 302 performance recommendations regarding control and construction joint fillers • USDA Coverage: *See Table Below. Specifications : At 70° F Mix Ratio (volume): 1A:1B Tack Free Time: 3-4 min Light Traffic: 1 hr Full Traffic: 2 hrs Shave Time: 1-24 hrs Tensile Strength: (ASTM D-412): 660 psi Shore A Hardness (ASTM D-2240): 84 to 88 Elongation: (ASTM D-412): 220% to 260% Color: Gray QWIK joint 200 No. Size EU T200 22 fl.oz . cartridge, 12/ case, (includes nut & nozzle), 24 lbs. Accessories TAM NOZSQ ½" x 7" mixing square nozzle NB 535XSP 22 fl oz Manual Cartridge Gun QwikJoint UVR No. Size EU TUVR 22 oz cartridge w/nozzle, 12/ctn Accessories TAM NOZSQ ½" x 7" mixing square nozzle NB 535XSP 22 fl oz manual cartridge gun *Coverage: 1 gallon of QWIKjoint UVR yields 231 in 3 of material. Six 22 oz cartridges equal approximately 1 gallon of material. The following table gives rough guidelines on estimating the amount of material needed. These numbers represent the length of joint that can be filled with 1 gallon of material, based on the joints’ width and depth. Joint Depth Joint Width 1” 1.5” 2” 2.5” 3” 3/16” 102 ft 68 ft 51 ft 41 ft 34 ft 1/4” 77 ft 51 ft 38 ft 30 ft 25 ft 3/8” 51 ft 34 ft 25 ft 20 ft 17 ft EPOXY / SELF LEVELING Expansion / Control Joint Sealants