MASCO Catalog: Construction Liquid and Powder

Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning : Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. See page 179-180 for more information. 113 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 ♦ www.MASCO.net Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville Voltex DS Description : A highly effective waterproofing membrane designed for below grade applications. Voltex DS is a composite of two high strength geotextiles, 1.1 pounds of sodium bentonite per square foot, and a HDPE Liner integrally bonded to the non-woven geotextile. The high swelling, low permeability sodium bentonite is encapsulated between the two geotextiles. Voltex DS works by forming a low permeability membrane upon contact with water. When wetted, unconfined bentonite can swell up to 15 times its dry volume. When confined under pressure the swell is controlled, forming a dense, impervious waterproofing membrane. The swelling action on the bentonite can self-seal small concrete cracks caused by ground settlement, concrete shrinkage, or seismic action. Application : Designed for below grade, vertical and horizontal structural foundation surfaces. Typical applications include backfilled concrete walls, earth covered roofs, structural slabs, tunnels, and property line construction. Property line construction applications include soldier pile and lagging, metal sheet piling, shotcrete and stabilizes earth retention walls. Applications may include structures under continuous or intermittent hydrostatic pressure. Coverage : 4' x 14.5' rolls/58 ft² Rolls : Side laps 4" End laps 4" Net area 90% Specifications : Peel Adhesions to Concrete (ASTM D-903): 15 lbs./in Hydrostatic Pressure Resistance (ASTM D-5385): 231 ft Permeability Rating (ASTM-5084): 1x10 12 cm/sec Tensile Strength (ASTM D-4632): 120 lbs. Puncture Resistance (ASTM D-4833): 140 lbs. Bentonite Mass Per Unit Area (ASTM D-3776): 1.1 lbs./ft² Mastic: ½" bead 77 lf/gal. No. Size AC DS 4' x 14.5' rolls, 58 ft 2 /rl, 84 lbs/rl, 30 pallet Accessories: Bentoseal: AC 3GBS 3 gal. pail, 36 lbs., 72/pallet Hydrobar Tubes: AC HT 2" x 24", 32'/ctn, 50 lbs., 50/pallet Termbar : CT TERMSL 10', 500'/ctn, 58 lbs. BENTONITE WATERPROOFING Waterproofing