MASCO Catalog: Concrete Forming & Accessories

99 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TIEING / HANDSET TIEING/HANDSET FORM BRACE ALIGNER 2 x 4 2 x 6 The Light SuperTie System offers an ultimate tensile strength of 6,000 lbs (3,000 pounds safe working load at 2:1 safety factor), and is most commonly used with job-built (plywood and 2 x 4) forms. The fiberglass rod diameter is only .308 inches, making the system compatible with most commercial forming systems. The fiberglass tie will never rust, so no breakback or tie removal is required. Many dollars in labor are saved by using SuperTie, while aesthetically superior architectural finishes result. It also reduces costs in battered wall and "odd sized" tie situations, since the rod is cut to the length required at the job site. SuperTie Fiberglass System Accessories Rod No. Rod Pcs/Bundle Wt (lbs) RJD B100 .308" x 20' 50 60.0 Plate Washer No. Size Rod Diameter Wt (lbs) PW 123HD 3" x 3" x 1/4" 1/2" 0.65 Spreader Clip No. Qty Wt (lbs) RJP SC 100/ctn 1.0 Turnbuckle Form Aligners Turnbuckle Form Aligners are designed to accurately position and plumb vertical forms. The turnbuckle section of the aligner features a 1" diameter self-cleaning coil thread for fast adjustments. The standard aligner has bent nailing plate equipped with nail holes and a 15/16" hole to accept 3/4" or 7/8" steel stakes. The safe working load of the aligners is limited by the lumber, nailing and/or staking methods. Rod, Gripper and Bearing Plate - the basic components of the Light and Medium Systems No. Wt (lbs) Gripper RJD GND6000 1.0 Standard Form Aligner NAILER PLATE FOR JOB BUILT FORMS 1" DIAMETER COIL THREAD TURNBUCKLE NAIL HOLES No. Wt (lbs) RC TB 8.0 Rod Spreader – SuperTie™ Smooth Rod Gripper Bearing Plate The Components of the 6K & 15K Systems. SuperTie™ Spacer Clips