MASCO Catalog: Concrete Forming & Accessories

98 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TIEING/HANDSET RESI-FORM TIES Flat Snap Tie The flat snaptie provides support through the horizontal joints between the plywood panels. Breakback after stripping is accomplished with a horizontal hammer blow. 100 per carton. Flat Snaptie Wedge Used to take up and secure flat snaptie ties to the panels. The wedge is secured with a vertical hammer blow and is released during stripping with a reverse hammer action. 50 per carton. Twisted Wire Tie Twisted Wire Ties supplied with E-Z BreakBack ends. Ties can be broken off flush with the wall surface quickly and easily, usually with a stroke or two of a hammer. Economical and typically used where surface appearance and clean breakback are not essential. Ties are made of 11 gauge galvanized wire, with a safe working load of 1,000 lbs. 100 pieces per bundle. SWL provides a factor of safety of approximately 2 to 1 No. Size Wt/Ctn (lbs) GT 19060 6" 8.0 GT 19080 8" 10.0 CT 58SD 5/8" x 20" 20.0 No. Size Wt/Ctn (lbs) CT 6118FT 6" x 1-1/8" 30.0 CT 8118FT 8" x 1-1/8" 35.0 CT 10118FT 10" x 1-1/8" 40.0 CT 12118FT 12" x 1-1/8" 45.0 No. Wt/Ctn (lbs) CT FTW 37.0