MASCO Catalog: Concrete Forming & Accessories

96 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TIEING/HANDSET SPREADER CLEATS Cleats Spreader Cleats are used for forming foundations up to 32" high. Space cleats at 32" maximum centers for form panels up to 24" high. For form panels over 24" and up to 32" high, space cleats at 24" centers maximum. Caution must be used with 3/4" thick panels 18" or higher as extreme deflection may occur, unless snap ties are also used. The stamped metal cleat is available with 3/4" and 1-1/8" for plywood panels. 2" for dimension lumber. SWL 750 lbs. Monostrap For single pour, inverted foundation. Used with spreader cleats. Cleats install inside channel. Monostrap length is equal to footing width plus 3". 20 pieces per bundle. SWL provides a factor of safety of approximately 2 to 1 NOTE: The cleat spacings and rates of pour listed are the maximum permissible for each size cleat. Masons Supply will not be responsible or liable for form failures where themaximumcleat spacingor recommended rate of pour has been exceeded. Wall Thickness Panel Thickness Pours up to 24" Height Pours up to 32" Height 6" 3/4" 1-1/8" 1-5/8" 32" Max Spacing 24" Max Spacing 8" 3/4" 1-1/8" 1-5/8" 32" Max Spacing 24" Max Spacing 10" 3/4" 1-1/8" 1-5/8" 32" Max Spacing 24" Max Spacing 12" 3/4" 1-1/8" 1-5/8" 32" Max Spacing 24" Max Spacing 14" 3/4" 1-1/8" 1-5/8" 32" Max Spacing 16" 3/4" 1-1/8" 1-5/8" 32" Max Spacing Spreader Cleat Plywood Panel Nail Cleats to Green Footing Spreader Cleat No. Actual Size Footing Size Wt (lbs) CT 15M 15" 12" 0.55 CT 17M 17" 14" 0.60 CT 19M 19" 16" 0.75 CT 23M 23" 20" 0.90 CT 27M 27" 24" 1.0 No. Size Qty/Ctn Wt/Ctn (lbs) CT 634R 6" x 3/4" 100 35.0 CT 6118R 6" x 1-1/8" 100 38.0 CT 6158R 6" x 1-5/8" 100 42.0 CT 6414R 6" x 4-1/4" 50 35.0 CT 834R 8" x 3/4" 100 42.0 CT 8118R 8" x 1-1/8" 100 45.0 CT 8158R 8" x 1-5/8" 100 48.0 CT 8414R 8" x 4-1/4" 50 36.0 CT 1034R 10" x 3/4" 100 50.0 CT 10118R 10" x 1-1/8" 100 52.0 CT 10158R 10" x 1-5/8" 100 56.0 CT 1234R 12" x 3/4" 100 57.0 CT 12118R 12" x 1-1/8" 100 59.0 CT 12158R 12" x 1-5/8" 50 33.0 CT 1434R 14" x 3/4" 50 32.0 CT 14118R 14" x 1-1/8" 50 34.0 CT 14158R 14" x 1-5/8" 50 36.0 CT 1634R 16" x 3/4" 50 36.0 CT 16118R 16" x 1-1/8" 50 38.0 CT 16158R 16" x 1-5/8" 50 39.0 CT 1834R 18" x 3/4" 50 40.0 CT 18118R 18" x 1-1/8" 50 42.0 CT 18158R 18" x 1-5/8" 50 44.0 CT 2434R 24" x 3/4" 50 50.0 CT 24118R 24" x 1-1/8" 50 52.0 CT 24158R 24" x 1-5/8" 50 53.0 Other sizes available on request.