MASCO Catalog: Concrete Forming & Accessories

94 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T Sigma 400 Fiberglass Tie System The Sigma 400 Series fiberglass form tie is an original thread form that maximizes the properties of both fiberglass and steel to create the strongest fiberglass threaded rod on the market today. There are many benefits of using Sigma 400 Series on your next forming project. Benefits: • Cut custom length ties on the jobsite • Eliminate unknown working loads with pencil “slick” rod forming • Custom threads for high working loads • No patching • Easy finish • Non-corrosive • Battered wall forming is easier • Drill and bond epoxy for single side forming • Hydrophilic water stops for water tight ties • Rebar hooks for large mat foundation pours • Couplers available Applications: • Large mat foundations • Replacing slick pencil rod • Board Form Concrete • Battered Wall Forming • Custom width walls • Multiple Accessories • Water holding tanks with our hydrophilic waterstops • Corrosion Resistant SAFE WORKING LOADS (2:1) STANDARD NUT: 3,000 LBS STANDARD + SHORT NUT: 4,000 LBS DOUBLE STANDARD: 5,000 LBS TIEING/HANDSET PENCIL ROD No. Description Wt (lbs) SDG 400ROD 400 Series Tie Rod (.4 X 12') SDG 400NUT 400 Series Nut (.400 M) SDG 400CLIP 400 Series Spreader Clip PW 123HD 3" x 3" x 1/4" Plate Washer Pencil Rod ¼ " pencil rod is available in coil form or bundles of 20 ft. straight lengths. If using coiled wire, must be straightened on jobsite before using. The Pencil Rod System is most commonly used in battered walls and foundations of unusual width where snapties are not practical. Pencil rod is simple and economical where surface appearance and clean breakback are not essential. ALLOW 9" FOR TIGHTENING WRENCH AND CLAMP ALLOW 4" PAST WALE BEND ROD AT 90 DEGREES No. Size Wt (lbs) W 14P Coil 100 lbs. 0.14/lf W 20PR 20' lengths 2.80/pc TIGHTENING WRENCH ROD CLAMP