MASCO Catalog: Concrete Forming & Accessories

87 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T SWL provides a factor of safety of approximately 2 to 1. SNAPTIES TIEING/HANDSET Clip On Waterstop Easy placement. Can be attached before or after the snaptie is installed. One touch attaachment. Expands by water contact. Fixed Metal Washer (FW) Fixed metal washers are available in standard capacity. Breakback of fixed washer is 1/4". 1-3/16" end uses 3/4" plywood and wedge. 1-5/8" end uses 1-1/8" plywood and wedge. Fixed Metal Washers provide a safe working load of 2,250 lbs. Adequate end clamps are required to develop safe working load. 100 pieces per carton. Vinyl Sleeve 1/2" diameter x 2" long vinyl plastic sleeve, nominal 1" breakback. For use with formliner. The length of the sleeve seals against leakage and also leaves a smaller hole after stripping to be patched. Provide a safe working load of 2,250 lbs. Adequate end clamps are required to develop safe working load. Available on request. SWL provides a factor of safety of approximately 2 to 1. Heavy Duty Heavy Duty Snapties are manufactured from high carbon wire with a 1 x 1 plastic spreader cones providing a nominal 1" breakback. Available in long and short end, special ends available upon request. Heavy Snapties provide a safe working load of 3,125 lbs. Adequate end clamps are required to develop safe working loads. Available on request. Custom Manufacturing Masons own manufacturing capabilities allow fast availability of any snaptie up to 144" overall length. Special sizes for battered walls and different ends to allow different forming methods on each side fo the wall. Can be furnished without cones for pass through ties. For special requirements give us a call. WALL THICKNESS BREAKBACK LUMBER AND WEDGE LUMBER AND WEDGE No. Size Wt/Ctn (lbs) CT 61316FW 6" x 1-3/16" 18.0 CT 81316FW 8" x 1-3/16" 21.0 CT 101316FW 10" x 1-3/16" 23.0 CT 121316FW 12" x 1-3/16" 26.0 CT 6158FW 6" x 1-5/8" 19.0 CT 8158FW 8" x 1-5/8" 22.0 CT 10158FW 10" x 1-5/8" 27.0 CT 12158FW 12" x 1-5/8" 32.0 Other sizes available on request. No. Wt/Ctn (lbs) ADE CRING8 .015 END 1" BREAKBACK END WALL THICKNESS