MASCO Catalog: Concrete Forming & Accessories

77 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T SHE BOLT TIEING/HANDSET She Bolt The she bolt tie system is one of the most versatile form hardware systems produced for use with large "crane handled" or "ganged forms." Using a bearing washer and wing nut on the threaded external end of the she-bolt allows this system to be used on a wide range of different formwork thickness. Inexpensive expendable inside tie rods are used, allowing the bolt assembly to be passed through the forms after both form sides have been set in place. She Bolts should be coated with white lithium grease before inserting into form and should be removed with a wrench. Waterseal Washer Neoprene waterseal washers may be installed on inside tie rods to help eliminate water seepage along the tie. Generally specified when ties are used to form water containment structures. SWL provides a factor of safety of approximately 2 to 1. WALL THICKNESS SETBACK SETBACK WING NUT FLAT WASHER INSIDE TIE ROD SHE BOLT NUT WASHER INSIDE TIE ROD LENGTH STANDARD LENGTHS D 10" 2" 4" TAPERED NOSE L No. Size Inner *SWL Tension (lbs) Wt (lbs) CFT SB17C 17"x¾" COIL ½" COIL 9,000 1.75 CFT SB20C 20"x¾" COIL ½" COIL 9,000 2.10 CFT SB24C 24" x ¾ " COIL ½ " COIL 9,000 7.0 CFT SB20 20"x1¼" COIL ¾" COIL 18,000 5.60 CFT SB24 24"x1¼" COIL ¾" COIL 18,000 7.00 CFT SB30 30"x1¼" COIL ¾" COIL 18,000 9.10 CFT SB36 36"x1¼" COIL ¾" COIL 18,000 12.00 Other sizes available on request. *SWL is based on using 1/2" high tensile N/C rod, 1/2" or 3/4" high tensile coil rod. No. Inside Rod Diameter Wt (lbs) DS D3312 ½ " 0.01 DS D3334 ¾ " 0.01 DS D331 1" 0.01