MASCO Catalog: Concrete Forming & Accessories

25 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T Single Liner Scaffold Bracket The all steel unit designed to fit 24" x 24", 16 x 24" tie and waler spacings. This jack has a built in guardrail receptacle and is designed to hold two 2 x 10 planks for a comfortable working platform. Space jacks at 8'- 0" maximum centers. Note: Snapties are not designed to carry scaffold bracket loads. No. Description Wt (lbs) DS 30305 A-89 17.0 VERTICAL FORMING SYSTEMS Liner Clamp Designed for use with a single 2x4 strongback for vertical form alignment, this liner clamp can be installed after erection of the forms and is not limited by form- tie spacing. Sturdy, galvanized construction reduces maintenance and replacement, and speedy installation reduces forming costs. Strongbacks are used to align and not to strengthen forms. They are normally used on one side only, spaced 6' horizontally. Liner clamps should attach the strongback to every other single waler. Waler Bracket Unsafe toenail connections can be eliminated and waler lumber saved by using this bracket. Fasten to studs with double head nails, insert walers and secure with Steel Wedge. Normal spacing 4' on center. Designed for double 2 x 4 or 2 x 6 strongbacks, used with a heavy duty snaptie wedge. 25/carton. Steel Wedge The steel tie holder is fabricated from high carbon steel and heat treated for added strength. Easily installed and removed; will not turn or fall off. 50 pieces/carton. No. Wt (lbs) CFA LC 1.1 No. Wt (lbs) CFA SW5 0.88 No. Description Wt (lbs) CFA WB24 2x4 0.88 CFA WB26 2x6 1.00 FORM ALIGNER CLAMP 2X4 STIFF-BACK ROTATE WEDGE TIGHTEN WEDGE WITH HAMMER SNAPTIE SYSTEM