MASCO Catalog: Concrete Forming & Accessories

220 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T MASONRY BRICK TIES DW-10HS ® Anchors Primarily for use when there is no insulation and little potential for wallboard deterioration. DW-10HS is 6" long with 3-5/8" vertical adjustability. Stocked in 14 gauge Hot Dip Galvanized. 12 gauge and Type 304 Stainless Steel is available on a special order basis. All anchors furnished with 9/32" diameter holes. No. Size Qty/Ctn Wt (lbs) HB DW10HS 6" 250 43.0 Swaged to accept continuous wire. Upward pitch rear leg Upward pitch front leg BYNA-Lok ™ Ties Swage & mild pitch on legs of the Byna-Lok™ Wire Tie provide an integral track for continuous joint reinforcing wire. Suitable for standard 3/8" mortar joint. More surface engagement of the continuous wire and the integral track than any other system on the market. Reduces potential for incorrect placement or disengagement of the continuous wire due to workmanship error. Hassle-free installation of the continuous wire into the Byna-Lok™ Wire Tie. Economical; add continuous wire to masonry walls at little additional cost. Suitable for use with a variety of H&B anchors. Available 3/16" dia. x 3", 4", and 5" long, Hot Dip Galvanized finish. Type 304 Stainless Steel on a special order basis. No. Size Qty/Ctn Wt (lbs) HB 3BL 3" 250 25.0 HB 4BL 4" 250 27.5 HB 5BL 5" 250 30.0 Coated Screws The maximum in corrosion resistant metal coating. Attractive silver-grey finish covers entire fastener surface. Compatible with painted or metal surfaces. Out performs existing mechanical and electro-platings. Supplied with EPDM washer. No. Description Qty/Ctn Wt/Ctn (lbs) Metal Studs: TEC HA1024C #10 x 1-1/2" (w/washer) 2,000 26.0 TEC HA1224C #12 x 1-1/2" (w/washer) 2,000 31.0 TEC HA1248C #12 x 3" (w/washer) 1,000 26.0 Wood Studs: TEC PGA1032 #10 x 2" (w/washer) 2,000 26.0 TEC PGA1040 #10 x 2-1/2" (w/washer) 1,500 22.0 TEC PGA1048 #10 x 3" (w/washer) 1,000 17.0 Stainless Screws 410 Stainless Steel is available with EPDM washers. This self- drilling screw has a hardened point for easy installation. Is frequently specified on stainless steel anchor jobs. The maximum in corrosion resistant. No. Description Qty/Ctn Wt/Ctn (lbs) TEC 4HA1024 #10 x 1-1/2" w/washer 2,000