MASCO Catalog: Concrete Forming & Accessories

217 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T HB 213-2X Anchor Plates The HB 213-2x is a seismic veneer anchor designed to meet performance criteria as defined by building codes. These anchors can be used for tieing brick veneer to wood stud, steel stud, steel framing, CMU masonry, brick and concrete. The connectors are individually mounted and are easily installed. The 14 gauge plate is engineered to be attached to the face of a CMU or concrete steel stud, wood stud or steel frame. A hot dipped galvanized finish is standard, and 304 stainless steel is available. It is recommended the use of two screws for stud applications. Hot dipped galvanized conforms to ASTM A-153, Class B. Other gauge steel and finishes available on request. 2x Seismic Wire Pintle The pintle is 3/16" diameter wire conforming to ASTM A-82 with a seismic clip. Pintle adjustments are maximum of 1-1/4" up or down. Continuous wire fits into place providing a single unit for stability. Continuous wire is embedded in mortar joint, secured to tie anchor which is fastened to support structure. It adds stability and protects against problems associated with thermal expansion and contraction. Also provides more uniform distribution of lateral forces. Hot dipped galvanized. Other finishes available on request. Conforms to ASTM A-153, Class B. No. Insulation Qty/Ctn Wt/Ctn (lbs) Plate HB 213-0 0 350 52.5 HB 213-1 1" 175 33.5 HB 213-1.5 1-1/2" 175 38.5 HB 213-2 2" 175 44.0 HB 213-2.5 2-1/2" 175 49.0 HB 213-3 3" 175 54.0 No. Size Qty/Ctn Wt/Ctn (lbs) HB 300SH2X 3" 350 37.0 HB 400SH2X 4" 350 40.0 HB 500SH2X 5" 350 42.0 MASONRY BRICK TIES 9/32”Ø holes (two fasteners per plate recommended) Continuous Wire H&B SH-SEISMIC HOOK U.S. Patents 6,789,365, 7,325,366 & 8,096,090 The embedded portion of the 2X-Hook is 3/16”Øround wire, satisfying the code requirement that the mortar bed thickness (typically 3/8”) must be twice the diameter of the wire Compressed Legs