MASCO Catalog: Concrete Forming & Accessories

210 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TILT-UP/PRECAST PRECAST P-93 L-Anchor The P-93 L-Anchor has a simple but efficient design capable of high pullout strengths. The L-Anchor is designed for face or edge lifting, and due to its strength and economy, is used commonly in earth retaining type panels. The P-93 L-Anchor in only available in 1 ton capacity. A special recess member with a narrow anchor slot is used in conjunction with this anchor. No. Size Wt (lbs) DS FL050 2 ton 0.30 P-95 Plate and Flat Foot Anchors P-95-F Flat Foot and P-95-P Plate Anchors are designed to be installed in the back of thin panels. These anchors have high tension and shear capacities and are easy to reinforce, when required. P-95-P Plate Anchors are available in 2, 4, and 8 ton capacities. P-95 -F Flat Foot Anchors are available in 2 and 3 ton capacities. When higher capacities are required, a Plate should be used. P-95-F P-95-P No. Size Wt (lbs) P-95-F DS FL058 2-3/4"x2 ton 0.50 DS FL400 3-3/8"x2 ton 0.58 DS FL157 3-3/4"x3 ton 0.92 P-95-P DS FL128 2-1/4"x2 ton 0.71 DS FL044 4-3/8"x4 ton 1.96 DS FL043 6-7/8"x8 ton 4.36 P-99 Recess members and accessories Recess Members are specially designed to hold Fleet- Lift anchors securely in place during the placement of concrete. The Recess holds the anchor at the proper depth below the concrete surface and creates a void for the ring clutch. The small void is easily patched to prevent exposure of the anchor to the elements. Recess Member is manufactured with an iron insert threaded with durable 3/8" coil threads to accept the 3/8" holding rod. All Fleet Lift Recess members utilize the same P-101 holding rod. Fleet-Lift Recess Members are available in 1, 2, 4, and 8 ton sizes. No. Size Wt (lbs) P-99 DS FL051 1 Ton 0.21 DS FL200 2 Ton 0.20 DS FL062 4 Ton 0.50 DS FL121 8 Ton 1.50 P-99-D Recess members and accessories P-99-D Fleet-Lift Disposable Recess Plug can be used to preset Fleet-Lift face-lift or edge-lift anchors or can be used to "wet set" P-94 Anchors. The Cover/Patch fits tightly onto the recess plug to fully protect the unit. The Cover/Patch is concrete gray in color and can be used as a patch over the recess opening for temporary or permanent cover. No. Description Size Wt (lbs) DS FL067B Body 4 and 6-ton 0.10 DS 067L Lid 4 and 6-ton 0.10 DS 067S Set 4 and 6-ton 0.20 P-99 P-99-D