MASCO Catalog: Concrete Forming & Accessories

21 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T Camlock The Gates camlock forming system embodies the use of common forming materials, 2x4 walers with 3/4" plywood. When used for built-in-place forming no ribbing or special hardware attached to the panels is necessary and the use of stiff backs and walers is cut in half. The rigidity makes it adaptable to all types of construction and especially desirable for high wall forming.Camlock bracket holds loop end of ties and walers. Malleable iron coating with hardened steel wedge. Scaffold Bracket Provides space for walkways of two 2x10 planks beyond the strongbacks. 2x4 guard rail supports are easily attached to the bracket. Space jacks at 6' - 0" maximum centers. A stiffback bracket must always be placed above and below each scaffold bracket. All 2x4 stiff backs used to attach the scafold bracket must extend to a solid base. Never use short pieces of 2x4's under the scaffold bracket. Stiffback Bracket Stiffback bracket is designed to accommodate a single liner system of 3/4" plywood and 2x4 horizontal waler. The cam-action eccentric is capable of taking up the variations in lumber size. Bracket is designed to be used with the camlock bracket. No. Wt (lbs) GT 76001 1.8 No. Size Wt (lbs) GT 77024 2 x 4 0.5 No. Wt (lbs) GT 78111 10.6 VERTICAL FORMING SYSTEMS CAM-LOCK BRACKET PLYWOOD BLOCK HORIZONTAL WALER CAM-LOCK STIFF-BACK CAM 2 X 4 STIFF-BACK CAMLOCK SYSTEM