MASCO Catalog: Concrete Forming & Accessories

208 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TILT-UP/PRECAST PRECAST SWL provides a factor of safety of approximately 4 to 1 in 3,500 psi normal weight concrete. Consult manufacturers data on values on shear and reduced edge distance. Fleet-Lift System The Fleet Lift System is an economical, quick connect disconnect system which allows precast concrete units to be handled repeatedly with speed and safety. The fleet lift ring clutch is easily connected to the anchor. The high quality and heavy duty construction of the fleet lift ring clutches will give years of safe use. Fleet Lift Anchors are available in 1, 2, 3, 4, 6, and 8 ton capacities. Each system component is clearly marked in tons with the maximum safe working load. This system is extremely versatile, being suitable for vertical and diagonal pulls. It can be used to raise concrete units from the horizontal to the vertical without the aid of a tilting table. P-91 Ring Clutch P-91 Fleet Lift Ring Clutches consists of a clutch body, curved bolt and a high strength steel bail. Attachment is as simple as sliding the curved bolt to the opened position, placing it over the anchor head and sliding the bolt to the closed position. The design of the steel bail permits full 360° rotation and will easily align itself with the rigging, allowing the safest position for lifting. Once engaged and under at least four hundred pounds of load, the clutch cannot be intentionally or accidently disengaged. When remote release is required, it can be easily accomplished with a lanyard after the load has been released. SWL provides a factor of safety of approximately 5 to 1 ultimate to rated load. P-92 Erection Anchors P-92 Erection anchors are engineered from high strength steel. All P-92 Erection Anchors have a special head design to control ring clutch pressure so it never bears on the concrete, helping to eliminate spalling during edge lifting. All anchors are available in plain finish, hot dipped galvanized or the durable and economical epoxy coating. P-92 Erection Anchors come in many different styles. The most popular is the standard P-92 Erection Anchor. This anchor is used with a fleet lift shear bar to safely lift precast elements from the edge in shear and transfer to tension. The P-92 Erection Anchor with shear plate eliminates the need for the shear bar. The shear plate accomplished the same function as the standard erection anchor and shear bar. The P-92-H Two Hole Erection Anchor, the most economical erection anchor, uses a shear bar or shear plate to resist shear and a required tension bar to safely lift and handle precast units from the edge. P-92 Erection Anchors are available in 2, 4, 6, and 8 ton capacities. P-92-P ERECTION ANCHOR WITH SHEAR PLATE P-92 ERECTION ANCHOR No. Size Wt (lbs) P-92 DS FL047 2 Ton 1.80 DS FL048 4 Ton 4.61 DS FL049 8 Ton 9.65 P-92-P DS FL147 2 Ton 2.25 DS FL148 4 Ton Galvanized 5.41 DS FL149 8 Ton 10.46 No. Size Wt (lbs) DS FL001 2 Ton – 3 Ton 4.60 DS FL002 4 Ton – 6 Ton 9.00 DS FL003 8 Ton – 10 Ton 20.00 P-92-H Two Hole Erection Anchor P-92-HP Two-Hole Erection Anchor with Shear Plate