MASCO Catalog: Concrete Forming & Accessories

206 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TILT-UP/PRECAST PRECAST P-52 Swift Lift Anchor The P-52 Swift Lift Anchor is hot forged from carbon steel. The formed head provides spherical seating that the Lifting Eye engages, while a disc-shaped fott is embedded in the concrete. Due to its being forged part, the Swift Lift Anchor does not depend on welds or thread engagement to develop its safe working load. Forging provides maximum safety with its advantageous material structure. This allows anchor to easily meet the OSHA requirement of a 4 to 1 factor of safety. No. Anchor Size Ton x Length SWL (tons) Wt (lbs) DS 60596 3/8 X 4-3/4 1 Ton 0.19 DS 60663 9/16 X 3-3/8 1.4 Ton Galvanized 0.32 DS 126866 9/16 X 6-3/4 2 Ton Galvanized 0.55 DS 60673 3/4 X 4-3/4 2.9 Ton Galvanized 0.97 DS 60675 3/4 X 9-1/2 4 Ton Galvanized 1.58 DS 60679 1-3/16 x 13-3/8 8 Ton Galvanized 4.61 Other sizes available on request. No. Size (Tons) Wt (lbs) DS 60571 1-1.3 T 3.0 DS 60574 1.5-2.5 T 5.0 DS 60577 3.0-5.0 T 7.5 DS 60580 6.0-10.0 T 17.0 DS 60583 20.0 T 35.0 L Swift Lift System The Swift Lift (SL) System is a quick connect-disconnect system which allows precast concrete units to be handled repeatedly with speed, safety and economy. The system is a non-welded system and also avoids threaded connections, which are time-consuming, subject to thread wear and damage, and the further risk of not being fully engaged, with consequent reduction of the safe working load. The reusable SL Lifting Eye is free of these disadvantages and by virtue of its quality and heavy duty construction will give years of use. The Swift Lift System is available with safe load ratings of 1, 1.3, 2, 2.5, 4, 5, 8, 10, and 20 tons. Each component is clearly marked in tons with the maximum safe rating load. The system is extremely versatile in use, being suitable for vertical pull or diagonal pull. It can also be used to raise concrete units from the horizontal to the vertical position without the aid of a tilting table. Swivel Lift Plates The swivel lift plate is designed for attaching to any type of single lift insert. The double swivel lift plate allows bail to rotate in direction of applied loads. Available in 3/4", 1", 1-1/4" and 1-1/2" coil bolt sizes. Use coil bolts of required minimum length. Based on a 5:1 safety factor. SWIVEL LIFT PLATE DOUBLE SWIVEL LIFT PLATE No. Description Height SWL Tension (lbs) Wt (lbs) DS 49109 3/4" Swivel 1-3/8" 7,000 14.0 DS 49110 1" Swivel 1-3/8" 10,000 14.0 DS 49122 3/4" Double Swivel 1-1/2" 7,000 8.0 DS 49124 1" Double Swivel 2"-11/16" 9,000 8.0 DS 49126 1-1/4" Double Swivel 2-3/4" 13,500 16.1 P-50 Swift Lift Universal Lifting Eye Uni-Lift Hardware is specially designed with a "T" shaped slot that hooks under the anchor head. The bail is a solid steel plate with a large hole to attach a cable clevis. The bail rotates from front to back in the lifting body. This action is an advantage over other existing systems as rigging does not need to be reversed when rotating a panel up and down. Has approximately a 5:1 safety factor. Under no circumstances should user modify, apply heat, weld or grind any part of the lifting hardware.