MASCO Catalog: Concrete Forming & Accessories

204 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TILT-UP/PRECAST TILT-UP Dry Film Lubricant For proper reuse of the COIL ANCHOR, dip the threaded portion of the bolt into our liquid DRY FILM LUBRICANT and immediately shake off any excess lubricant. Set the lubricated bolt aside and allow the lubricant to dry. Thread the new tang onto the bolt so the flattened end of the tang points towards the head of the bolt. The tang should be assembled onto the bolt with only a light finger tightness, NO MORE than 1½ turns, making certain that you DO NOT pre-expand the tang. Coil Anchor T13 Coil-Anchor drill-in anchors are used for attaching braces to the floor slab. Features & Benefits: • Tapered threads • Reusable • U.S. Patent No. 5,006,023 Product Data: • Each T13 Coil-Anchor set includes one coil-anchor bolt, one cut washer and one tang. • When using T13 Coil-Anchor bolts, always clean and lubricate the bolt with T13L Set-Eez™. Failure to do so will result in bolt wear, lower than expected load capacity and possible premature failure. • WARNING: If wind loads over 35 miles per hour are experienced on the job site, all T13 anchors should be checked with a torque wrench to verify proper torque values are maintained. T-13-G Thread Gauge T-13-G Thread Gauges are recommended to check T-13 bolt thread wear when reusing T-13 Coil-Anchor Bolts. No. Description Wt (lbs) Qty/Ctn DS 49206 3/4"x4-1/2" .80 20 sets DS 123045 3/4"x6" 1.0 20 sets DS 49203 Tang only .04 100 No. Wt (lbs) No. Size Wt (lbs) DS 49205 6 oz 0.40 ANCHOR WASHER 4 TURN TANG .740" MAXIMUM TANG O.D.