MASCO Catalog: Concrete Forming & Accessories

198 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TILT-UP/PRECAST Wall Brace Anchor For use in panels where the brace is to be attached to the "up face" of the panel as it lies on the casting slab. These anchors are often referred to as "standard" Brace Anchors. Use standard coil threaded bolts. Available in plastic tipped feet and insert locator plugs installed. Recommended minimum distance from edge of panel or panel opening is 12". No. Size Wt (lbs) DS 512T6A ¾" x 5½" 1.13 DS 6T6A ¾" x 6" 1.17 DS 612T6A ¾" x 6½" 1.22 DS 7T6A ¾" x 7" 1.27 DS 712T6A ¾" x 7½" 1.31 WALL BRACE TILT-UP No. Bolt Diam. (in) Slab Thickness (in) SWL (lbs) Torque (lbs) Wt (lbs) Qty/Ctn SB BI4 3/4" 4" 4,500 70 .75 0.55 SB BI5 3/4" 5" 5,300 100 1.00 0.60 SB BI6 3/4" 6" 6,500 120 1.25 0.65 Brace Bolt Insert The insert is unique because the bolt is an integral part of the assembly. Once you remove the locator cap, you have the bolt at your fingertips. There is never a need to go looking for the hardware. The insert has wire legs for the slab thickness, plastic feet to prevent corrosion at the concrete surface, a welded coil insert, a 3/4” bolt with protective sleeve, and a disposable locator cap. When the disposable locator cap is removed, the coil insert and 3/4” bolt is exposed, providing the anchor point for bracing. Size: Minimum distance from panel edge is 12” or loads must be reduced. SWL is based on 2:1 safety factor. No. Size SWL (lbs) SB BBI345 3/4”x5” 7,200 SB BBI34612 3/4”x6-1/2” 9,600 SB BBI34714 3/4”x7-1/4” 10,200 SB BBI348 3/4”x8” 11,600 SB BBI34914 3/4”x9-1/2” 11,900