MASCO Catalog: Concrete Forming & Accessories

191 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TILT-UP/PRECAST TILT-UP 22 Kip RING LIFT Lifting Clutch The 22 Kip RING LIFT Lifting Clutch hooks over the head of the Ring Lift 22 Pro Insert. The major advantage of this lifting system is that with angular lifting, the Ring Lift clutch directly discharges the lateral force into the concrete. Safety Factors Reusable lifting hardware 5:1 Tilt-up inserts for lifting 2:1 RING LIFT 22 PRO SYSTEM (22 kip Capacity) This well-designed Ring Lift Tilt-up System for loads up to 22 kip for proper tilt-up construction. Made of quality steel, each part for safety and strength through extensive manufacturing and safety testing to assure safe lifting as specified in this booklet. RING LIFT 22 PRO Insert The RING LIFT 22 PRO Anchor is a bend legs with additional cross bar and has been designed to create a sufficient anchoring force (shear cone) in the concrete. The Ring Lift Hardware attaches to the head for lifting. The RING LIFT 22 PRO Insert* is embedded into the concrete with a plastic former. The plastic former creates a void in the cured concrete after it is manually removed. The 22 PRO Insert are standard delivered for the required panel size. 22 PRO Dial Feet can be removed and turned 90-180-270 degrees to increase or decrease height of the insert 1/4 - 1/2 - 3/4”. No. Cap. (ton) Size Wt (lbs) SB SLE8TSPG 8T 3-5/8" x 13-1/2" x 3/4" 8.0 SB SLE4TSPG 4T 3-1/16" x 10-1/2" x 5/8" No. Ring Clutch System (by ton) Wt (lbs) Qty/Ctn SB RL5T 3T-5T SB DVF8T 8T-10T No. Size Wt (lbs) SB RL22KP-HW 22 Kip 26.0 Safety Factor = 2.5:1 Normal Weight Concrete, Compressive Strengh = 3,000 psi No. Panel Structural Thickness (in.) Safe Working Load (lbs) TENSION Safe Working Load (lbs) SHEAR Wt,. (lbs) SB RL22PRO-5 5.00 8,100 14,000 2.7 SB RL22PRO-5.5 5.50 8,700 14,200 2.7 SB RL22PRO-6 6 14,300 19,500 2.85 SB RL22PRO-6.75 6-3/4 14,300 19,500 2.85 SB RL22PRO-7 7 17,350 22,000 3.0 SB RL22PRO-7.25 7-1/4 17,350 22,000 3.0 SB RL22PRO-7.5 7-1/2 17,350 22,000 3.0 SB RL22PRO-7.75 7-3/4 17,350 22,000 3.0 SB RL22PRO-8 8 19,000 22,500 3.15 SB RL22PRO-8.5 8-1/2 19,000 22,500 3.15 SB RL22PRO-9 9 22,500 22,500 3.3 SB RL22PRO-9.25 9-1/4 22,500 22,500 3.3 SB RL22PRO-10 10 22,500 22,500 3.45 SB RL22PRO-11 11 22,500 22,500 3.6 SB RL22PRO-12 12 22,500 22,500 3.75 • Safe working loads are based on calculations and full scale load tests. • For panel thickness in between thickness published use lower next SWL. • For panel thicker than 12", contact SureBuilt. Edge Lifting Anchor Ideal for horizontal to vertical edge lifts and the shear rotation of thin-walled units • The shear plate replaces the need for a shear bar making it easier to install • Specially designed head provides added protection against spalling • Specially designed body allows for full reinforcement SB RL22KP-HW Lifting Clutch Edge Lifting Anchor Edge Lifting Anchor Void