MASCO Catalog: Concrete Forming & Accessories

183 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T POUR IN PLACE Installation Procedures 1. Locate lowest spot or any area where excess water will accumulate. 2. Dig trench wide enough to allow for 3" of back fill on each side of Spee-D, 2" for Mini Channel, 1" for Micro Channel and 4" for Pro Series. Dig trench deep enough for overall height of channel and grate plus 3" for Spee-d, 2" for Mini, 1" for Micro and 4" for Pro Series. Allow 1/4" recess of grate below surface level for additional drainage. 3. Backfill trench with either concrete or sand and tamp thoroughly. This allows for a level base and provides support. Concrete is always recommended for automobile traffic applications. (NOTE: Trench bed must be compacted prior to installing channel.) 4. Measure and cut channel with fine tooth saw to desired length and remove burrs. Assemble channel, using couplings and channel accessories. Test for accurate measurements by placing channel in trench. (NOTE: You must allow for bottom or end outlets to connect to sewer and drain pipes). 5. Disassemble channel drain and apply PVC primer and PVC cement to all joints. Reassemble channel joints. Allow cement to dry thoroughly. 6. Install grate on channel. Completely cover grate with duct tape. (NOTE: Grate must be on channel prior to installation to prevent deflection by concrete). No. Description Color Wt. (lbs) NDS 8003 10' Channel Includes (1 Coupler) Grey 5.0 Accessories NDS 8653 Channel Clean Out Grey 0.30 NDS 8481 Coupler Grey 0.10 NDS 8473 End Cap Grey 0.05 NDS 8463 End Outlet, w/1-½" Sch. 40 Grey 0.10 NDS 8503 Bottom Outlet w/ 1-½" Sch. 40 Outlet Grey 0.35 NDS 8513 Side Outlet w/ 1-½" Sch. 40 Outlet Grey 0.35 NDS 8383 90° Elbow Channel Grey 0.40 NDS 8303 45° Elbow Channel Grey 0.30 NDS 8373 Tee Channel Grey 0.40 MICRO CHANNEL DRAIN