MASCO Catalog: Concrete Forming & Accessories

172 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T POUR IN PLACE ANCHOR BOLTS Stab Bolts The Stab Anchor Bolt is the first tested and inspected friendly anchor bolt for holdowns. Extensive testing has been done to determine the design load capacity at a common application, the garage stem wall. Special features include; Rolled threads for higher tensile capacity; Offset angle reduces side bursting and provides more concrete cover; Stamped bolt head for identification after pour; Stamped embedded line to aid installation; and, Configuration results in minimum rebar interference. Suitable for monolithic and two pour installations. Nuts and washers are not supplied. SB Anchor Bolts The SB anchor bolt offers an anchorage solution for our holdowns that call for a 5/8"-diameter, a 7/8"-diameter and a 1"-diameter anchor. • Identification on the bolt head showing embedment angle and model • Sweep geometry to optimize position in form • Rolled thread for higher tensile capacity • Hex nuts and plate washer fixed in position • Available in HDG for additional corrosion resistance Material: ASTM F-1554, Grade 36 Installation: Install SB before the concrete pour using AnchorMate ® anchorbolt holders. Install the SB per the plan view detail. No. Description Wt (lbs) Qty/Ctn SS SSTB16 5/8" x 19-5/8" 1.38 50 SS SSTB20 5/8" x 24-5/8" 1.65 50 SS SSTB24 5/8" x 28-5/8" 1.94 50 SS SSTB28 7/8" x 32-7/8" 4.53 50 No. Description Wt (lbs) Qty/Ctn SS SB5824 5/8" x 24" SS SB7824 7/8" x 24" No. Dia Color Wt (lbs) SS AM12 1/2" Yellow 7.15 SS AM58 5/8" Blue 7.15 SS AM78 7/8" Green 7.15 Stab Bolt Holder Designed to hold the anchor in place before the concrete pour, as required in some jurisdictions. Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and easy to use. Reusable yet cost-efficient for single application. Threaded grippers hold each bolt in the exact same location and height. They secure bolt in place without nut for quicker set-up and tear-down, and protect threads from splashing concrete. Use the 5/8" and 7/8" Anchor Bolt Holders to secure the SSTB to the formboard before the concrete pour. Available in 100 per carton. EMBEDMENT LINE SLAB FOOTING DOUBLE POUR INSTALLATION STAB ANCHOR BOLT SB ANCHOR BOLT 24" 6" 18" embedment line (top of concrete)