MASCO Catalog: Concrete Forming & Accessories

163 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T FASTENERS FASTENERS Titen HD Anchor The original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance. Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications, the Titen HD demonstrates industry-leading performance even in seismic conditions. The stainless- steel Titen HD is the optimal choice for applications in corrosive or extreme environments such as salt water, or when chemical or corrosive solutions are present. See Stainless-Steel Titen HD for more information. • Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713 • Code listed under IBC/IRC in accordance with ICC-ES AC106 for masonry per ICC-ES ESR-1056 • Qualified for static and seismic loading conditions • Thread design undercuts to efficiently transfer the load to the base material • Standard fractional sizes • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved • Reuse of the anchor to achieve listed load values is not recommended Material: Carbon-steel stud with special alloy clip or stainless steel stud with stainless-steel clip. Coating: Zinc plated No. Size (in) Drill Bit Size (in) Wrench Size (in) Qty/ Box Qty/ Ctn Carbon Steel SS THD37300H 3/8" x 3" 3/8" 9/16" 50 200 SS THD37500H 3/8" x 5" 3/8" 9/16" 50 100 SS THD50300H 1/2" x 3" 1/2" 3/4" 25 100 SS THD50400H 1/2" x 4" 1/2" 3/4" 20 80 SS THD50500H 1/2" x 5" 1/2" 3/4" 20 80 SS THD50600H 1/2" x 6" 1/2" 3/4" 20 80 SS THD50800H 1/2" x 8" 1/2" 3/4" 20 40 SS THDB62400H 5/8" x 4" 5/8" 15/16" 10 40 SS THDB62500H 5/8" x 5" 5/8" 15/16" 10 40 SS THDB62600H 5/8" x 6" 5/8" 15/16" 10 40 SS THDB62800H 5/8" x 8" 5/8" 15/16" 10 20 SS THD75500H 3/4" x 5" 3/4" 1 1/8" 5 20 SS THDT75600H 3/4" x 6" 3/4" 1 1/8" 5 20 Spike The Spike is a patented all-steel, one piece, vibration resistant anchor for use in concrete, block, brick or stone. Using a special manufacturing process, the anchor is formed with "S" shaped configuration at the working end of the anchor to create an expansion mechanism. The spring action of the expansion mechanism is developed through the use of a heat treatment, cold working process, or die-casting depending upon the Spike style. The carbon steel Spike is manufactured from steel which is heat treated to provide a high tensile and shear strength equivalent to Grade 8.2 material. The steel is plated with commercial bright zinc and a supplementary clear chromate treatment according to ASTM B633. Carbon Steel - Zinc Plated No. Size Wt (lbs) Qty/Ctn RL 5502 3/16" x 1" .013 100 RL 5503 3/16" x 1-1/4" .015 100 RL 5504 3/16" x 1-1/2" .018 100 RL 5506 3/16" x 2" .020 100 RL 5508 3/16" x 2-1/2" .030 100 RL 5522 1/4" x 1" .015 100 RL 5523 1/4" x 1-1/4" .023 100 RL 5524 1/4" x 1-1/2" .025 100 RL 5526 1/4" x 2" .030 100 RL 5528 1/4" x 2-1/2" .040 100 RL 5530 1/4" x 3" .045 100 RL 5531 1/4" x 3-1/2" .050 100 RL 5551 3/8" x 3-1/2" .110 25 RL 5552 3/8" x 4" .120 25 RL 5554 3/8" x 5" .180 25 RL 5571 1/2" x 3-1/2" .220 50 Also available in stainless steel.