MASCO Catalog: Concrete Forming & Accessories

12 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T VERTICAL FORMING SYSTEMS Flex-Form ® gives you all the strength and versatility you need. Has 4" deep vertical stiffeners with 3/16" steel skin plate to provide a 1000 psf system that handles any radius 5' and over. Pre-Rolled Steel Ribs Set the Radius Rolled top and bottom ribs bolt to flexible panels to shape and securely hold the form in the radius you require. Panels conform precisely to the radius of the ribs - this design assures that you'll get the correct radius every time. And with a straight rib, you can produce a straight wall if needed. Perfectly Smooth Concrete Because the steel skin plate flexes to form the desired arc, there's no chording effect in the poured concrete surface. Conventional panel systems produce form joint marks that require grinding and rubbing. Flex-Form ® produces smooth concrete surfaces that require little or no finishing labor. Fast and Simple Erection Panels are delivered to the job site pre-assembled to your required radius. There are no expensive templates to build; no need to torque bolts; just begin erection labor. If the job requires more than one radius, simply order extra rolled ribs for use with the same forms. Change over is quick and simple - done on the site by job personnel. The new rolled ribs will automatically set the new radius to the forms; this will speed assembly and increase forming productivity. Stacking Panels Panels can be stacked by bolting the top and bottom ribs of adjacent forms with ¾" fit-up bolts and nuts. Steel walkway brackets may also be bolted to the vertical stiffeners to provide vertical alignment. Pipe Form Aligners bolt directly to vertical stiffeners as well. Specifications Skin plate thickness: 3/16" Pressure rating: 1,000 psf Panel/filler heights: 2', 3', 4', 5', & 6' Width: Panels - 4', 8', & 12' Fillers - 4", 6" & 8" Approximate Weight: 20 psf (assembled) Thickness of panel: 4¼" Minimum radius: 5' FLEX-FORM®