MASCO Catalog: Concrete Forming & Accessories

119 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T CURB & EDGE FORMS SLAB/HORIZONTAL Curb Forms The Curb Forming System is a versatile product line that adapts to many different concrete forming conditions. It is ideally suited for applications that include sidewalks, driveways, curb and gutters, pavements, footing and industrial slabs. This forming system features durable steel components, with added reinforcement, for maximum service life. These components are precision welded to provide a system that lasts far longer than conventional lumber edge forms. The productivity advantages of this forming system are obvious. The system adapts to different project conditions, reducing applied forming costs. A crew sets the system quickly and consistently, reducing related labor costs. The steel design eliminates lumber replacement costs, maximizing system reuse. Straight Forms The Straight Form is available in 10' lengths, with heights ranging from 4", 6" and 12", to satisfy almost any straight edge forming condition. Each form has reinforced stake pockets on the back side that secure ¾" steel stakes and support the form during concrete placement. The rounded nose and connection of one form quickly connects into the box of another form for accurate alignment. Straight Forms are most often used as edge forms for concrete slabs. The bottom edge of the form rests on the subgrade or the stake pocket holds the form at the proper elevation. The top edge of the form provides a place for lightweight screed equipment used during concrete placement. Forms can even be stacked for thick concrete slabs. Straight Forms are also used to form a variety of curb and gutter configurations. Curb dimensions establish the shape of the Division Plates needed. The Plates are then positioned over the Straight Forms to support the Curb Face Form. The final concrete finish is applied after the Curb Face Form and Division Plates are removed (before final set). USED WITH STRAIGHT FORMS FOR EXACT DIMENSION SLABS INSIDE AND OUTSIDE CORNER FORMS SKELETON PLATE FULL PLATE DIVISION PLATE NAIL STAKE FRONT FORM TOP SPREADER BACK FORM CURB FACE FORM 4" THROUGH 8" 9" THROUGH 16"