MASCO Catalog: Concrete Forming & Accessories

114 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T FORM TREATMENT FORM RELEASE PETROLEUM BASED Mascokote VOC Description : A chemical active release agent in a mineral oil carrier for concrete forms which effectively prevents bonding of concrete to the form. For use in steel, plywood, and treated aluminum forms. Manufactured with virgin oil and organic chemicals which react with the concrete to prevent adhesion and provides a quick and easy release. This quick, easy release is provided without staining, discoloration or pitting and leaves no residue or cement dust on the concrete surface if properly applied. Concrete is left with an architectural surface ready for application of curing compound, sealer, bondable for plaster, mastics or paints when used in accordance with manufacturer’s instructions. Application : Forms should be free from dirt, hardened concrete and foreign matter. Release agent is ready to use direct from container. Can be applied with a sprayer, roller or brush at all working temperatures. Apply a thin film for maximum protection and economy. Spray areas uniformly. Over application creates dusting. Prior to coating plywood forms, apply one or two heavy coats to edges for waterproofing protection. When subsequent material is to be applied to the concrete, follow the application and preparation instructions of the material manufacturer. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8, Navy Dock, and Piers 56359, VOC Compliant. Coverage : Steel, Plastic, Fiberglass: 2000 sq ft/ gal Conditioned Aluminum: 2000 sq ft/ gal HDO Plywood: 2000 sq ft/ gal MDO Plywood: 1500 sq ft/ gal Dimensional Lumber: 1000 sq ft/ gal BB Grade Plywood: 1000 sq ft/ gal No. Size MS 5GMK 5 gal. pail, 50 lbs., 24/pallet MS 55GMK 55 gal. drum, 550 lbs. No. Size ACC 5GRR 5 gal. pail, 50 lbs., 24/pallet Ruff Release Description : A unique thickened blue colored release agent primarily for low or no draft applications on rough, irregular or smooth surfaces. Ruff Release yields a smooth and easy release from all types of form surfaces. Application : Apply Ruff Release to the most intricate and difficult form surfaces where release stresses may pose problems or wherever release issues are anticipated. Ruff Release works well in all applications and will not stain the surface on which it is used. May be used on all types of form surfaces including plastic, rubber or styrofoam. Apply a very thin coat with a rag, sponge or swivel type mop. Wipe off excess prior to casting.